Presentation & Preservation
charlie belden
>Jamie D., in an earlier thread, brought up the issue of presentation, in terms of photographing pieces as a means of showing one's work- and doing so well. Let's be realistic. Most of us will never have a piece in a gallery, let alone the Mano Gallery, MOMA or the AAW Permanent Collection, or for that matter in ANY "brick and mortar" gallery. Few will ever see, and if you are of an artistic bent, experience pieces we've created.
(OK - so Clay Foster and few others here do both - galleries and great images of their creations)
That leaves "virtual galleries", here and on other web sites. And then, only digital images, created directly with a digital camera or scanned from a print of an actual film negative are there to represent one's works. Fortunately, even relatively inexpensive digital cameras can produce reasonably good images of a turning - though the color balance may be off a bit, wash out and distracting / irritating bright hot spots due to poor lighting may obscure details which enhance the piece and maybe the focus ain't as good as it should be. But there's enough to convey the shape/form and maybe some of the beauty of the wood used.
While these snap shots are more than adequate for general documentation of our turning journey, they're more like road side attractions post cards (Remember when people use to drive around the country, stopping to see sites of interest and pick up souvenirs?. If you've actually seen the Statue of Liberty, the Lincoln Memorial, The Grand Canyon or walked through parts of Arlington Cemetery these post post cards can serve to recall what we saw, and experienced while seeing them). But, unlike an Ansel Adam's photo like Half Dome Moonrise or Moonrise over Hernandez, NM - our snapshots barely touch on what was in front of the camera - sometimes fortunately for us (OK, I'm the only one who hides "imperfections" in my turnings when I take pictures of them, and consider slight blurring often beneficial).
It's true that making good photos of a turning is not a trivial thing. Most require using the "macro" function of the camera - made to take a picture with the camera 2 to 18" from the subject. In that distance range, things that don't really affect the resulting image much - depth of field, backgrounds, color balance, exposure times, lighting position(s) etc. - when you get in close they really can matter - a great deal. BUT - it ain't rocket science either. With a little creativity and some scrounging - two things turners are good at - one CAN present one's Stuff a LOT better.
We find some pretty nice wood, acquire lathe "accessories"and all manner of turning tools, take the time to develop our skills with these things, work hard at turning pleasing forms and finishing them to a T - and then have maybe 10 people ever see what we've spent so much thought, time and energy creating. Yet, with the availability of so many web sites for getting images of our pieces out there, either to show what NOT to do as well as to maybe convey not only a 2-D representation of our work/play but also a better "feel" for a piece - most of us stick with Post Card images and quick and convenient snapshots. Who needs to add photography to the schedule. "Maybe if I sell a few pieces - for a hefty sum - I can afford to hire someone to take good pictures of my stuff. Til then I'll just keep taking snapshots."
So, with all the traveling Demonstrators and all the DVDs about How To, why is there so little out there about PRESENTING turnings - in this case with digital photography?
Now admit it. Most of the nice pieces you've turned aren't kept. You'd probably be up to your backsides in turnings if you didn't get rid of most of them - as gifts, or sold for pennies on the dollar in terms of time and materials invested, or burned during a cold snap. And all you have left of most of those pieces are some semi-decent, more likely semi-crappy, pictures of them, printed or digital, which probably couldn't be found if your life depended on it.
And that gets us to preservation. There are advantages to taking, keeping and organizing photos of your turnings as you go. The better the photos the better they can serve you - and perhaps others if you share them via the Internet. By looking back you may see the evolution of an idea - and maybe some insights which form a future turrning - or - fall into the Those That Do Not Study History Are Condemned To Repeating It trap. And who knows, those photos of earlier work may become valuable "provenance" for someone someday in the distant future. You never know . . .
But there's another part to preservation - preserving the wood, and the finish. Graeme Priddle made an interesting observation - "In the end, ALL wood turns brown - often a less than beautiful shade of brown - or gray." His point was to not rely too heavily on the look of the wood right after it's been turned and finished. Sunlight, humidity, temperature, exposure to air and other environmental factors will reduce the wood's visual impact, leaving mainly The Form, and in Graeme's case - the textures of the piece.
A beautiful piece Off The Lathe may not be quite as attractive - as it cracks and splits and warps- and fades. That nice natural edged bowl - what happens if some of those natural edges - fall off? That oil finish you used? How does it react to exposure to air, or sunlight? Will that friction polish which makes the wood gleam keep the piece gleaming a week from now or a year from now? Is it a good idea to place that nice, functional salad bowl - up on top of a cabinet - where there's more heat than down lower? How will that shellac finish you got just right - stand up to damp cloths wiping it? That punky wood hollow form you did - is that punky wood going to get punkier over time? What about that CA glue holding your prized turning together? Will CA glue hold up over decades, or generations?
"Hell, I'll be long gone when that happens so I don't give a hoot what happens after that!"
But surely you've done a piece of two for a child who will outlive you. That piece may become a prized possession - "A special thing dad/mom/gramps made - just for me!" that he or she may pass on to her/his kid.
Now how important is presentation and preservation of your turning - to you?
What tips do you have and are willing to share with others on these two subjects?



