Hand wheel
Jim Canning
>I am looking for a hand wheel for a Nova 3000. This is a older lath that I don't think it came with one. Or do you know where I could get one.
Thanks Jim
Knowledge You Can Build On — Est. 1998
Hand wheel
Jim Canning
>I am looking for a hand wheel for a Nova 3000. This is a older lath that I don't think it came with one. Or do you know where I could get one.
Thanks Jim
Re: Hand wheel
Gary Ljostad
>Turn one.
Re: Hand wheel
john lucas
>My Nova 3000 did come with one. You could probably order one from Techantool or someone like Craft Supplies or Woodcraft may be able to order one. I believe it has a left hand thread so making one yourself would be difficult unless you have a left hand tap. It's been too long so I don't remember the thread size.
Re: Hand wheel
Stuart Johnson
>I bought mine from Woodcraft.
Re: Hand wheel
Jim Canning
>Thanks for the help, I will check out woodcraft.
Jim
Ditto, then I turned a larger diameter wooden one
Steve Antonucci
>If you buy the Nova hand wheel, it will be self explanatory...
Steve
Re: Hand wheel
Ken Ward
>I am gonna make one for my 1624.As for the threads,just turn the wheel,then core out the hole (or drill it with a forstner bit)to about 1/16th smaller than the spindle,then wax it up real good,lock the spindle shaft and make you own threads.Just use a good hardwood with no voids.I have made threads like this before and it works.I'm just to cheap to buy one.
Re: Hand wheel
Ed Heuslein
>Contact Tim Geist at Tvgeistmfg@aol.com He handles Nova in the U.S. now and has a lot of spare parts. He's great to deal with.
Tim Geist
Jorge Castaneda ~ Downeast Maine
>The Teknatool rep, somewhere in W VA.
His name and address has been mentioned quite a few times in this forum, do a search.
$0,02
Jorge
I have it in an old hard disk, if you cannot find it Ill dig it out.
Re: Tim Geist
John Peck
>Tim Geist's web site is: http://www.timstoolcrib.com
Contact info for him can also be found at the Teknatool web site, www.teknatool.com
More stuff
Al Kapocius
>If'n you need a left hand thread, check Bill Noble. I picked up a 1x8 nut with washer welded on for mini faceplate. Mebbe he's got other sizes as well.
Al Kapocius