First Lidded Box - Thanks Mike Stafford
Philip Morris
>Been reading up on box turning for a few months while making some changes in the shop. Found Mike Stafford's article on turning lidded boxes. It, combined with Richard Raffan's Turning Boxes, really guided and inspired me. Mike also responded to several box making questions I posted here and asked that I post a picture, so here goes.
It's from a scrap of maple, about 2 1/4" high by 1 1/2" diameter. Turned with a suction fit lid. Finished by wet sanding with Russ' tung/turp/poly mixture, then Beale buffed and a coat of Renaissance wax.
Comments/critiques welcome.




