Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Stemware Question

Posts

Stemware Question

#1

Stemware Question

Fog Tanner

>I am making some goblets which have a wooden stem and glass bowl. I got the glass from Craft Supply and on their sitet they advertsied Bondaflex as the adhesive, but were out of it. It is a silicon sealant. In their instructions, they use epoxy.

I had planned on using the silicon, but the glass that I received only as a 3/8" by 1/2" long stem. I am not sue that is enough for the silicon. I seem to remember some other people using an epoxy which is used mainly for glass, but can't remember the name. I am not sure any of the epoxies I have are primarily for glass. I am sure that there are some other people that have made these and would like to hear what you used and how it worked over time.

The wood is Mesquite, so I don't think I will have much movement to worry about. Just the adhesion to glass.

Thanks,

Fog

Re: Stemware Question

#2

E6000

Brian Hahn in SW Wisconsin

>E6000 is a good flexible adhesive that sticks to just about everything, including your fingers. I've had good results with it on glass, wood and metal. It's flexible like a silicone adhesive and has a tenacious grip once it cures. I buy it at a local home center.

Re: Stemware Question

#3

Re: E6000 I Agree

Barbara Gill, Remlik VA

>

Re: Stemware Question

#4

Thanks Brian and Barbara

Fog Tanner

>Thanks Brian and Barbara. I think that is the one I was looking for. I will venture out tomorrow (later today) and check the home centers and hardware stores. I assume the cure time is seven days like most of the other epoxies.

Fog

Re: Stemware Question

#5

Re: Stemware Question

john lucas

>I've been using the same Clear Silicone Caulking that I use for my mirrors. So far it's worked fine.

Re: Stemware Question

#6

Re: Thanks Brian and Barbara

Brian Hahn in SW Wisconsin

>Fog,

E6000 is a single component glue that looks and behaves a lot like silicone or GOOP. It cures in a day. It seems like it cures faster, but that's what the tube says.