Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

little container

Posts

little container

#1

little container

John K Jordan

>Trying to get caught up on my photography...

I made this little container at JCC from a piece of english walnut that Jamie Donaldson gave me. The profile is based loosely on one that Knud Oland had done. I LOVE the color of this wood - the picture doesn't do it justice but the one at the bottom is closer to the actual color. The lid is cherry and the knob is from the walnut. It's about 3" in diameter.

I like lidded boxes like this: the fit isn't so finicky to make and doesn't change with the seasons, the lid can be removed with one hand, it's easy to incorporate other woods, and best of all, if the lid is lost the piece is still useful!

If anyone knows where I can find some more english walnut like this, please let me know.

JKJ


img

Re: little container

#2

Re: little container

Michael Stafford

>I remember this piece and how you fussed over the lid. It looks great John. I agree with you, English walnut can be spectacular. Nice little box!

Re: little container

#3

question

Steven Kubien

>Sweet little box ya got there. The lid looks like it is tapered to fit kind of like a cork. Is the inside of the box tapered to match or.....?

Cheers,

Steve

Re: little container

#4

Re: question

John K Jordan

>Steven,

The inside widens immediately under the a fairly sharp lip to form a smooth curve down to the bottom. The lid is cut for a very close fit without being snug, with a little lip on the top.

As Mike mentioned, I "fussed" over the lid a bit. Following the standard methodology I turned and finished the female part first (the bottom in this case), turned the male part to fit (the inside and bottom of the lid), then reversed and turned the top of the lid before making and fitting the knob. Due to the concavities on the bottom of the lid and the fact I couldn't jam chuck it as you would "normal" box parts because of the taper, it took some head scratching.

Thanks for looking!

JKJ