Ten Pins *LINK*
mfoster
>Hi all. Well I finally got all the rolling pin gifts made for my office staff. It didn't help that our power went out from the ice-storm for 3 days over the weekend that I intended to be working in the shop. Instead I spent time getting a generator hooked up to our furnace so the house didn't freeze. On top of that, I spent time trying to figure out my problem with vibration at the tailstock (I think that I really do have it nailed down to the morse taper in the spindle being too narrow deeper into the quill. I tried using abrasives wrapped around a center to get it right, but didn't really do the trick. I have a morse reamer coming to me and will let you know the outcome).
I kept the form very plain because the figure in the wood was so nice, and these are really intended for use. I made a trip to a mill a couple hours north of me to get the wood and some wood for shelving I intend to build for our den/library. I was going to get some cheap poplar for the shelving (to be painted) but found they had some really nice wide maple (10-12") for 1.60 bd ft, quite a bit less than their poplar. It was cheap because they call it brown maple: ie lots of heartwood and more character but doesn't sell. I thought it was a steal, and may have to rethink painting it. They had found and saved a piece of 8/4 curly maple for me, as I told them I wanted something nice for the rolling pins. Turns out this board was 12' long and 11" wide with wonderful figure. They wanted 4.70 a bd ft for it and were willing to sell me just the 4' I needed. I just couldn't let them crosscut that nice piece of wood, so I just bought the whole thing and brought it home. Don't know what I'll do with the rest of that piece of firewood. Subtle gloat!
http://breezyhillturning.com/



