Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Sea Urchin ornament from JCCFS class

Posts

Sea Urchin ornament from JCCFS class

#1

Sea Urchin ornament from JCCFS class

Dennis Yoder

>Here are some of the 40 or so sea urchin ornaments that I learned to make in a class by Ed Moore at John C Campbell folk school this fall. They are for friends, family, and co-workers of SHMBO. Thanks for looking Dennis Y


img

Re: Sea Urchin ornament from JCCFS class

#2

Re: Sea Urchin ornament from JCCFS class

Ed Moore in SW Virginia

>You were an excellent student, and this picture proves it! Good job. I hope that SWMBO approves.

Ed

Re: Sea Urchin ornament from JCCFS class

#3

Re: Sea Urchin ornament from JCCFS class

Michael Stafford

>Dennis, beautiful work. Lovely icicle!

Merry Christmas to you and your lovely bride!

Re: Sea Urchin ornament from JCCFS class

#4

Ellis Walentine

It's in the gallery now  *LINK*

Ellis Walentine

>


WC Ornament Gallery

Re: Sea Urchin ornament from JCCFS class

#5

Re: Excellent work Dennis, but........

Jamie D

>... the image needs an exposure adjustment of about +1 in the camera exposure compensation settings. Underexposure like this robs the image of color saturation and contrast, due to the reflective background that fools the metering system in the camera.

Re: Sea Urchin ornament from JCCFS class

#6

Re: Excellent work Dennis, but........

Cyril Griesbach

>Very nice, Dennis. I haven't seen you around lately...nice to have you back.

Re: Sea Urchin ornament from JCCFS class

#7

Jamie, how does one make the ...

Ed Moore in SW Virginia

>camera adjustment that you refer to?

And a Merry Christmas to you!

Ed

Re: Sea Urchin ornament from JCCFS class

#8

Re: I hate to say it this way Ed, but ...

Jamie D

>...you have to read the instructions. Most current dcams have menus for manual adjustments, and exposure should be one of those options. Adjusting exposure is critical when backgrounds give errors due to differing reflectance values, such as black being low and white being high. The object(turning)in front of a B or W background doesn't change in value, but the background makes up the great majority of the image area, often leading to a reading error by the camera exposure system. If you can make an exposure setting by filling the VF with an 18% gray card you will have a universal setting, but few know to do this.

Re: Sea Urchin ornament from JCCFS class

#9

some ways to control exposure

John K Jordan

>Jamie said it well. The manual is best, but if you say what camera model you have someone may already know how and tell you.

While reading the manual, keep in mind some ways to compensate exposure (what I can think of at the moment, each may make general assumptions that don't apply in specific cases):

GOOD WAY, PHOTO SETUP:

- Move or control lighting (screens, reflectors) to put more on subject and less on light-colored background

- Use a gray or gently colored background instead of black or white (don't use blue without tough skin :)

COMMON WAY, CAMERA:

- Use an exposure compensation control (usually marked +/-) or menu option

- Use an automatic "backlight" setting available on some cameras

- Use manual exposure, trial and error

- Meter subject, gray card, or your hand instead of scene, some ways:

-- Switch to spot metering (meters only a small spot, often marked in viewfinder)

-- zoom in or pan until subject mostly fills frame

-- Use exposure lock

-- Use manual exposure

WORST WAY:

- Fix it in editing (seldom adequate, you can't adjust what's not there)

A darker background might look especially nice with a light subject.

JKJ

Re: Sea Urchin ornament from JCCFS class

#10

Re: Excellent work Dennis, but........

Dennis Yoder

>thanks Jamie. One of these days I'll understand cameras. Dennis Y