Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Black Cherry HF

Posts

Black Cherry HF

#1

Black Cherry HF

Gil Jones---Georgia

>The first piece off the new PM3520B, and it is a joy to use.

It is 12" wide x 5" hi, with 1/4" thick walls. The collar is Holly dyed black w/ink and finished with gloss lacquer. The Cherry is sanded to 4000, polished with EEE (which was no fun on that much surface area). After working on the foot in my Donut Chuck, I buffed the Cherry with white rouge, and gave it a buffed on coat of hard wax.

Last, the collar was lightly buffed and waxed, then epoxied in place.

Thanks for looking it over.

Gil


img

Re: Black Cherry HF

#2

Re: Black Cherry HF

Barry Turner

>Very nice! That collar looks like ebony or blackwood. The finish is superb. I like it!

Re: Black Cherry HF

#3

Re: Black Cherry HF

Gil Jones--Georgia

>Thanks, Barry, I enjoyed turning it. Here is a top view.

Gil


img

Re: Black Cherry HF

#4

Re: Black Cherry HF *LINK*

Dick Coers

>Gil,

I'm a bit reluctant to make a post like this, but after the Trent Bosch demo my club had, I've become very aware of the use of a Fibonacci gauge. It will let you stick to the Golden Mean ratio for your height on the vessel. I think if you would put the gauge to your vessel, you might see that the largest diameter of the vessel would be placed higher up the vessel. Well I said it, hope the idea is not out of line. I mean, who the heck am I to comment. Just sharing.


Fibonacci guage

Re: Black Cherry HF

#5

Re: Black Cherry HF

Gil Jones--Georgia

>Hi Dick,

I have no problem at all with your comment. The height would have been been 9" until I ran into a gaping wide crevasse inside the wood, and by the time I cut it away I had lost 4" of the bottom height. Such is life. I still like it the way it is, but I also see your point.

Thanks for your insight.

Gil

Re: Black Cherry HF

#6

Re: Black Cherry HF

Dick Coers

>Oh boy, hate those design opportunities. Thanks for the kind comment. Sounds like your original design would have hit the proportion just right. Glad you like it, I do too.