My first crush grinder *LINK*
Ellis Walentine
>Here's a peppermill I made yesterday. It has one of Packard's ceramic crush mills in the base. I wish I could say it was quick and easy, but when you have to make all the jam chucks and find the drill bits and extensions and fiddle with an antique chuck, it turns into a bit of an ordeal. I'm glad I don't make these for a living.
The wood is mission olive from a Woodfinder member. It turned nicely but was murder on my Forstner bits. And, there was a burl in the base and when I pressed the mechanism into the recess, the little fins on the barrel of the mechanism blew a crack through the entire base. I had to epoxy it back together and use a set screw to hold the mechanism in place. At least the end result is pretty nice, although I wouldn't give it as a gift with that repair in there.
The finish is Clapham's salad bowl wax. The photo was taken on the hood of my car for lack of a ready seamless setup.
Thanks for looking.
Ellis
Olivewood Creations



