Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Jet 12"x20"

Posts

Jet 12"x20"

#1

Jet 12"x20"

Jim in WI.

>I have read many positive posts on here about the Jet 10"x14". My question is, is the 12"x20" as good a machine? I'm hoping it is as my better half is buying one for me as I write this. There is currently a $25 and a bonus $50 rebate on this lathe. $75 total in rebates, not bad.

Re: Jet 12"x20"

#2

Re: Jet 12"x20"

Allen Neighbors

>I don't know about the 12x20, but any lathe is better than no lathe!! I'd say it's a pretty nice gift from SWMBO. Jet makes some nice lathes, so I'll bet it ranks up there with the rest. Congratulations. Remember that she needs to see some benefit from it, if you know what I mean... :o)

Re: Jet 12"x20"

#3

Re: Jet 12"x20"

john lucas

>If anything the 1220 is better. I've demo'd on one several times now and really like it. The only downside is if you have to carry it. It is quite a bit heavier than the 1014 but then that adds to the stability.

Re: Jet 12"x20"

#4

Re: Jet 12"x20"

Philip Morris

>Jim,

I took delivery of a 1220VS about a month ago. Have turned a few pieces on it. I got the variable speed model, which I highly recommend. The additional slower speed makes a big difference when roughing an unbalanced blank.

I have read of some who did not like the loss of torque with the 1014VS at low speed. The 1220VS seems to have addressed that by increasing the motor to 3/4hp.

It is a very smooth, quite lathe.

Re: Jet 12"x20"

#5

Re: Jet 12"x20"

Jim Sebring

>It's a fine lathe. I've had my 12 X 20 for almost two years now. The standard MT2 head and tailstocks, and the 1 X 8 spindle has caused me to spend far too many $$$ on accessories. I have often wished the machine had a variable speed method other than changing the belt.

I've made a bunch of pens during my learning curve. Sometimes the precision needed to make a good pen makes most other spindle work seem like child's play.

BTW, my spouse received the first pen (a slimline) I ever made. It doesn't look so hot these days, but I made her a super Jr. Gent rollerball using Amboyna burl to make up for it.

Re: Jet 12"x20"

#6

Bill Blasic

Re: Jet 12"x20"

Bill Blasic

>I have the 1220 VS and feel this is the mini/midi that all the small lathes should be modeled after. The bigger mass and more powerful 3/4 HP motor make this a super nice machine. As for mine I have had this lathe turning for over 5 hours straight and the motor was absolutly cool to the touch, very impressive. Now as a traveling lathe it is a bit more weight to tote around.