A very fun day!
Bill Grumbine - Kutztown PA
>Greetings all
I have not been posting much here lately, or on any turning board for that matter. It is not that I am not turning. I am doing plenty of that! It is just that I am posting other places which have to do with my own hobby. But today I had the very good pleasure to host Mike Hunter in the shop for the day. Mike and I have been trying to get together for a couple of years now. Mike had the good fortune (?) to be sent to Pa. on business, so he combined that trip with one here to the Five Barns Compound. ;-) We spent the day making shavings and talking tools.
I had some very fresh Norway maple, harvested just last week, so we threw some of it on the lathe, and Mike went to town on it. Here he is using a Thompson 5/8" bowl gouge with a custom turned curly maple handle.
And while we were turning, we talked SWMBO into taking a picture of the both of us. I was concerned that I might not make it through the day with the back problems I have been having these past couple of weeks. I am starting to feel my years when it comes to splitting large rounds with a maul, not to mention horsing around pieces that weigh in excess of 1000 lbs. That little bitty piece of Norway maple came from somewhere you know. ;-) But we both made it through, and had a very good day. Mike is a very nice guy, and he makes some very good tools, as many of you know. Slicing through wet maple with them was a lot of fun as well. But I don't have any pictures of that. After I give my back a rest I am going to have to get out the snow shovel and the wheelbarrow, and there is no snow around here. ;-)
Bill





