Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

First turning posted on WC

Posts

First turning posted on WC

#1

First turning posted on WC

Ray Carson - Lawrenceville, NJ

>This is a spalted Dogwood vase I made for my WC Secret Santa recipient. It's roughly 6 1/2" tall, 4" wide at the "belly" and 1 1/2" at the neck. The glass test tube is 1" x 6". Sanded to 600 grit and finished with a couple of coats of HUT.

I had to re-teach myself what I learned from high school, read some books, buy a lathe, and buy lathe tools but I think I'm getting there. Most importantly, I learned some things from my friends right here on the round side. Thanks.

Words of advice are welcome. Be kind. LOL

:-)

Ray


img

Re: First turning posted on WC

#2

Re: First turning PIC #2

Ray Carson - Lawrenceville, NJ

>Test tube removed.


img

Re: First turning posted on WC

#3

Re: First turning PIC #2

Don at Central Illinois

>Very nice. Wish my first turning was half as nice. Keep it up.

Re: First turning posted on WC

#4

Re: Doesn't look like you need much....

Jamie D

>...advice Ray, as both the turning and photo are well done! Just don't make the test tube fit too tightly as the wood can move and potentially crack the glass.

Re: First turning posted on WC

#5

Re: First turning posted on WC

Jim Shaver - Oakville, Ont

>Hey Ray,

Love the wood, the shape works for me, I know the recipiant will love it!!

take care,

Jim

Re: First turning posted on WC

#6

Re: First turning posted on WC

Cyril Griesbach

>Nicely done, Ray. Some day I will get my first turning from my mother and I may post it if there is an ugly bowl contest. It may be a winner. Your first turning is already a winner.

Re: First turning posted on WC

#7

HMMM...

Don Orr

>Haven't I seen that some where before Santa Ray ? Very nice work !

Re: First turning posted on WC

#8

She does!

Joanne in Pt. Pleasant, PA

>I am the happy recipient of Ray's beautiful turning. No, there is still no lathe in my shop, but that does not mean I don't enjoy everyone else's turning work. I wish my first flat project looked half as good. Thanks again, Santa!

Re: First turning posted on WC

#9

Re: She does!

Carole Valentine

>Joanne, we are gonna get you yet! If I had the money, I would buy a lathe and secretly install it in your shop in the middle of the night, along with a chuck, a few tools and some blanks! :))

Re: First turning posted on WC

#10

Re: She does!

Jim Shaver - Oakville, Ont

>Hey,

Well I have a lot of turning tools I can donate, I find I have way more than I need anymore, but hey, Joanne is a flat worker, leave her alone!!!!

I know she cuts a mean dove tail... yeah I know, I have a box she made...and those are awesome dt's....

:-)

Take care,

Jim

Re: First turning posted on WC

#11

Re: She does! - It was my pleaseure!

Ray Carson, Lawrenceville, NJ

>

Re: First turning posted on WC

#12

Re: Doesn't look - It's okay I think

Ray Carson, Lawrenceville, NJ

>It's slightly oversized but not sloppy. I was afraid of the water spilling over too had this happened and compensated for it. Thanks for looking out for me though. :-) Like I said, the advice I've picked up hear at WC on turning and posting photos has been top notch.

Ray

Re: First turning posted on WC

#13

Re: HMMM...Joanne guessed my name...so

Ray Carson, Lawrenceville, NJ

>I thought it would be okay to post. I sent Joanne an email asking her if I could post a picture but she must have busy looking for some flowers to put in her........wait a minute.....

Hey Joanne, unless you have some special, top secret soli over there in PA, then flowers might be hard to come by this time of year. LOL

Hope you didn't mind that I posted some pictures here PA buddy. ;-)

Ray

Re: First turning posted on WC

#14

Lucky Girl!

Jennifer@Indy.USA

>Joanne that is quite an honor to be the recipient of somebody's first turning. Ray you did a fantastic job. I love the plump form and the finish looks fantastic.

Merry Christmas Joanne!

Jen

Re: First turning posted on WC

#15

Re: Lucky Girl!

Joanne in Pt. Pleasant, PA

>Merry Christmas to you and Wes and the family, too!

Re: First turning posted on WC

#16

Ha!

Joanne in Pt. Pleasant, PA

>One of these days, Carol, one of these days! I've been cleaning out my Dad's basement shop and bringing home tools and things. I'm surprised I haven't found a lathe hidden among his old stuff yet. Just about everything else, but no lathe there, either.

But then, weren't YOU the one who warned me NOT to allow a lathe in my shop if I still had flat work to create? Well, I do, indeed, have several "flat" projects still on my list. So, the lathe will have to wait. :-)

Re: First turning posted on WC

#17

Don't mind at all, but

Joanne in Pt. Pleasant, PA

>if you sent such an email requesting this, I did not receive it. No problem anyway. You should be proud of the vase and are welcome to share the pictures.

Re: First turning posted on WC

#18

'flat work' list

Steven Kubien

>Get the darned lathe. Don't worry, the flat work projects can stay on their little list...for years at a time actually! DAMHIKT

Steve Kubien