>The latest in my Manta Ray series ,This was made from a piece of hackberry that Tom Crosby sent me.
The distinctive finial was sent by Keith Burns
7 inches square I turned the piece with the help,of struts to support the wings as they take a fare punishment making contact with the skew at speed.I first cut the underside wings and then strut the bottom tips back to the main body with hot melt glue .Because I turn these in the square the speed has to be wound up.More of this series can be seen at www.timberly.co.nz under winged vessels .Some of the pieces have been made up to 2 feet square using this method
>Just another way to try. Look up Vic Wood, the Australian turner. He would turn this sort of shape using "slaves" of wood around the "good" wood. The idea is to put the part of interest off center and shape the up/down rays that way -- instead of using the struts that you mention.
>You don't have to copy anything; I was suggesting using waste-blocks as a technique. The "fun" is in getting more interesting shapes in a much safer way. I don't have any problem copying the masters to learn from them; presumably, after a while, the work will take on your personality. It's done in the fine arts all the time.