Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Grizzly 16"x42"

Posts

Grizzly 16"x42"

#1

Grizzly 16"x42"

Jim in WI.

>Does anyone have experience with this lathe? Good points, bad points?

Thank you

Re: Grizzly 16"x42"

#2

JL

Re: Grizzly 16"x42"

JL

>I saw it at the IWF in August. I thought it looked like a reasonable knock-off of the Jet 1642. I didn't do anything with it except look at it.

Re: Grizzly 16"x42"

#3

Re: Grizzly 16"x42"

Ken

>I turned on a friends a few months ago and didn't really care for it,he is getting rid of it and getting PM.I have the Nova 1624 and love it.I have heard a few other folks tried em and didn't like em.The Nova will do anything it will,but if you wanted something with a little more power and with VS the Nova DVR has an excellent rep.Or even Jet all very good lathes.

Ken

Re: Grizzly 16"x42"

#4

Re: Grizzly 16"x42"

John Foschaar

>I started turning on a Grizzly 14 X 42 (G0584)and I soon found out the slowest speed setting (600 rpms)was way to fast for roughing out bowl blanks. A couple of years later Grizzly came out with the 16 X 42 (G0632), with money being it short supply I opted for a new Griz. verses another brand.

The machine is doing a good job for me and the only objection I have is the slowest speed I can adjust to is 90rpms. At slow speed the lathe can be stalled if one gets to aggressive. As a note I purchased an Easy Rougher, stalling has been greatly reduced, no more heart stopping catches and if it does catch it is minor.