Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Pierced Madrone Vessel....

Posts

Pierced Madrone Vessel....

#1

Pierced Madrone Vessel....

Wally Dickerman in Arizona

>This is also madrone burl. The collar is Bolivian Rosewood. It's about 7 inches in dia. Finished with Daly's Ben Matte tung oil.

Wally


img

Re: Pierced Madrone Vessel....

#2

Re: Pierced Madrone Vessel....

Don at Central Illinois

>Wally, great looking pieces. Do you lay out or trace a pattern onto the wood or just freehand? Inquiring minds want to know.

Re: Pierced Madrone Vessel....

#3

Re: Pierced Madrone Vessel....

Wally Dickerman in Arizona

>Thanks Don. I draw an outline of the design with a pencil and an eraser. All freehand, as is the piercing itself. Makes a bit of smoke as the tool is turning at 350,000 RPM. The drill is about half the dia. of a pin.

Wally

Re: Pierced Madrone Vessel....

#4

Re: OSB for shop walls

terry quiram

>That is just what I did. 7/16 osb for walls and ceiling. All my electrical is in conduit running on the outside of the walls. I have never regreted it. Stain hider paint over the markings then flat white over everything.

Terry

Re: Pierced Madrone Vessel....

#5

Dick Hines

Re: Pierced Madrone Vessel....

Dick Hines

>Wally, what is the inlay in the line between the opening and the piercings?

Re: Pierced Madrone Vessel....

#6

Re: Pierced Madrone Vessel....

Wally Dickerman in Arizona

>Dick, it isn't inlay, it's texturing. It's also done with the dental tool, using a tiny round burr. (made for drilling on someone's teeth)

Wally

Re: Pierced Madrone Vessel....

#7

Super piece, Wally...nice work!

Gil Jones===Georgia

>

Re: Pierced Madrone Vessel....

#8

Re: Pierced Madrone Vessel....

Don Orr

>Beautiful piece Wally-as usual. All the elements really come together extremely well.

Re: Pierced Madrone Vessel....

#9

Re: Pierced Madrone Vessel....

Jim Shaver - Oakville, Ont

>It's always a pleasure to see your work my friend,

Take care,

Jim

Re: Pierced Madrone Vessel....

#10

Thanks For Your Comments Folks...

Wally Dickerman in Arizona

>

Re: Pierced Madrone Vessel....

#11

Re: Pierced Madrone Vessel....

Jennifer@Indy.USA

>Wally,

It's always so inspiring to see what you're up to in the shop. It's a treat to see you always exploring and looking for new things to try. The results are always wonderful!

Jen