Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Oops....Pierced Bowl....

Posts

Oops....Pierced Bowl....

#1

Oops....Pierced Bowl.... 

Wally Dickerman in Arizona

>


img

Re: Oops....Pierced Bowl....

#2

Re: Oops....Pierced Bowl....

Russ Fairfield

>Wally, what tool are you using for the piercing??

Re: Oops....Pierced Bowl....

#3

Re: Oops....Pierced Bowl....

Wally Dickerman in Arizona

>Russ, I'm using an NSK Presto dental tool. The same tool that Binh Pho uses...in fact, I bought if from Binh.

Wally

Re: Oops....Pierced Bowl....

#4

Re: Oops....Pierced Bowl....

Tommy Holmes

>Wally,

How thick is this bowl? I have heard pierced pieces are normally about 1/16" thick and this bowl looks thicker than that. It would be good to know that piercing can be done on thicker pierces than the 1/16".

Re: Oops....Pierced Bowl....

#5

Re: Oops....Pierced Bowl....

Wally Dickerman in Arizona

>It's 1/16th in. Any thicker and it becomes difficult to pierce. Any thinner and the bowl becomes too fragile.

Wally

Re: Oops....Pierced Bowl....

#6

Re: Oops....Pierced Bowl....

Carole Valentine

>Nice, Wally. I take it this a small bowl...somewhere around 3.5" in diameter at the rim?

Re: Oops....Pierced Bowl....

#7

Re: Oops....Pierced Bowl....

Wally Dickerman in Arizona

>Carole, the bowl has been sold so I can't measure it, but I'd say about about 4.5 in.

Wally

Re: Oops....Pierced Bowl....

#8

Thanks For Your Comments....

Wally Dickerman in Arizona

>