Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Diamond Inlaid Acrylic Acetate Niles Stopper

Posts

Diamond Inlaid Acrylic Acetate Niles Stopper

#1

Diamond Inlaid Acrylic Acetate Niles Stopper

Steve Russell

>Hello to the group,

Here is a photo of a Ruth Niles LP-SS stopper inlaid with (24) 2.5mm CZ Diamonds, set in solid 18kt white gold. Outside diameter of each stone is 3.18mm. The stopper body is made from a blue swirl acrylic acetate stopper blank, polished to 12,000 grit with Micromesh abrasives.

The holes for the 2.5mm diamonds were drilled using a McNaughton (Kelton) ornamental jig, using a large Foredom hand piece to hold the 2.6mm drill bit. Holes were drilled 1.85mm deep at 18,000 RPM. Diamonds were inlaid with thick set Cyanoacrylate ester adhesive. Top coat is Renaissance microwax, buffed at 3,000RPM.

I've been having lots of trouble posting messages and pictures of late (Webformboundarykit error rears its ugly head), so I hope the picture uploads correctly... The last one I uploaded got smaller when it was clicked, instead of getting larger. Some don't upload at all. I need to take a class with John Lucas... :-) :-o Thanks and take care.

Steve Russell

Eurowood Werks Studio

The Woodlands, Texas

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#2

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

Jennifer@Indy.USA

>I think the picture is either so small that I can't see it or the diamonds so bright that it's blinding my ability to see the stopper. Either way, I'd love to see it!

Try again please Steve.

Jennifer

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#3

Oops! Working on it.

Steve Russell

>Humm...

The picture selects but does not upload. WC's interface does not like Mac's at all, so it's usually a battle to get something uploaded. Maybe it's too big. What are the size requirements for posting? Is it a total file limit, or file limit, plus pixel dimensions as well. Any ideas?

Steve Russell

Eurowood Werks Studio

The Woodlands, Texas

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#4

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

Jim Shaver - Oakville, Ont

>what's the total diamond weigth?

Jim

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#5

Re: Oops! Working on it.

Steve Russell

>Found the 80kb limit in the archive, now I have to get the 8.2MP file resized in Photoshop so it is still clear enough to see.

Steve Russell

Eurowood Werks Studio

The Woodlands, Texas

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#6

Re: Oops! Working on it.

John Jordan

>Steve,

Macs work GOOD! You can resize easy if you are using iPhoto. You can select your pictures and under "file" select export and choose your size and save them to the desktop, or a folder. Or sometimes I just select the photos I want and email them to myself. You can select small, med, large or actual size. Medium will give you a nice size photo for web use and a reasonable file size.

Painless.

John

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#7

Re: Oops! Working on it.

Colin

>Steve, download the image resizer powertoy from Microsoft it works well and is easier than photoshop for a quick resize.

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#8

Re: Cubic Zirconia are Not Diamonds

Barbara Gill, Remlik VA

>I just save the file and then use the browse feature below. Then just click on the photo. If it is too large, the WC software will tell you.

I may be splitting hairs but there is a big difference between diamonds and cubic zirconia or CZ.

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#9

Re: Oops! Working on it. *LINK*

John K Jordan

>Steve,

There is no limit that I can see on the pixel dimensions of a photo. (See the 2560x1920 photo I posted in the link below) The trade off with a bigger photo is the quality due to compression decreases somewhat proportionally to the number of pixels. The quality is highly dependent on the image content, i.e., for a number of pixels a more detailed image will look worse than one with large areas of the same color or gentle gradients.

If you have trouble, email the photo to me and I'd be glad to process it and send it back or post it here. Otherwise, the message thread in the link has some specific and general information on preparing photos, as does the WC FAQ page.

JKJ


http://www.woodcentral.com/cgi-bin/messages3.pl?re

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#10

Re: Cubic Zirconia are Not Diamonds

Jim Shaver - Oakville, Ont

>Yes Barb,

HUGE difference.. it's very misleading to say Diamond to some one when it's CZ... fake

Jim

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#11

Don't care what it's called.........

Ruth Niles

>I'd love to see the picture. I don't think anyone would be under the impression any real diamond would be used in a bottle stopper.....would they?!?

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#12

Re: Don't care what it's called.........

Barbara Gill, Remlik VA

>Ruth, you never know. The only way we can communicate effectively is the correct use of our language at least within reason.

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#13

Re: The FTC cares very much.

Brian Hahn in SW Wisconsin

>The Federal Trade Commission does not like mislabeling of gem stones, both precious and semi-precious. Full and complete disclosure is required in all sales. Selling a mislabeled gem is a big no-no.

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#14

Correct

Jim Shaver - Oakville, Ont

>

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#15

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

Texian

>That's a good story.

Re: Diamond Inlaid Acrylic Acetate Niles Stopper

#16

Re: Mislabled diamond :-)

GalenV

>So if I was going to have my cremation ashes made in to a "certified diamond" as they advertise my relatives would actually get stuck with a lump of coal?