Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

cremation urn question

Posts

cremation urn question

#1

cremation urn question

chris rolke

>well I have been chosen to make a cremation urn for my 92 year old grandfather who just passed away a week ago

i do a lot of segmented work and green wood turning

he was a carpenter and wood worker all of his life so i feel very good having been asked to do this

shape is still being thought of and material is still a question also

but my main questions have to do with is size everything i have read is 1 cubic inch per pound is this correct? obviously i want to make sure that i am larger than smaller

the other is on the lid

any ideas??

thinking of just a threaded insert placed into the piece to make it seal.

it has to be able to be reopened after my grand mother passes to have both ashes spread

thanks for any help

Re: cremation urn question

#2

Re: cremation urn question

John Veerkamp, Western Mo

>For my mother I turned a Grecian inspired urn out of walnut. The 1 cu"/lb was fine for volume. Instead of a lid I turned through the bottom and made a tapered opening with a lip 1'4" in. Then I turned a matching plug. I secured the plug with countersunk brass screws. I also used a thin silicone bead to provide a secure seal. The plug could be removed by slicing the seal with a razor knife and removing the screws. On the top I fixed a brass plate ingraved with name and dates.

I was pleased with how it turned out.

John

Re: cremation urn question

#3

Re: cremation urn question *LINK*

chris rolke

>thanks for the info

just stumbled on to this

and it makes very good sense


Threaded_inserts_for_urns

Re: cremation urn question

#4

Re: cremation urn question

Barry Irby

>What kind of glue would you use to glue an ABS plastic ring to a wooden urn? Seems to me it would turn loose after a while, due to the movement in the wood. The "glue" used in gluing plumbing fittings is a solvent that melts the surface of mating parts and allows them to weld. Would not work on wood. I like the idea, just need the right glue.

Re: cremation urn question

#5

Re: cremation urn question

chris rolke

>i would think that ca would work

will have to try this

thanks for the ideas

Re: cremation urn question

#6

Why Would Polyurethane Glue Not Work?

Philip Morris

>It expands to fill voids, remains flexible and bonds dissimilar materials.

Re: cremation urn question

#7

check the archives

John K Jordan

>Chris,

You might search the archives here. The volume needed has been discussed before, several years ago I think - I remember someone researching the requirements.

JKJ

Re: cremation urn question

#8

Re: Goop

Russ Fairfield

>The "Household GOOP" works well.

Re: cremation urn question

#9

Re: Also E6000

Brian Hahn in SW Wisconsin

>

Re: cremation urn question

#10

Re: check the archives

chris rolke

>thanks

i will look in to it

Re: cremation urn question

#11

Re: check the archives

Gary Evans Tallassee, TN

>Chris,

If you want to go with a wooden threaded insert, check with Mike Hare at VM Woodworking near Atlanta. At one time he and a buddy were selling threaded inserts and plugs made from various species.

Email me and I'll send you his phone number.

Gary

Re: cremation urn question

#12

Re: cremation urn question

Bruce McElhaney, Spring Lake, Michigan

>One cubic inch per pound of body weight appears to be the accepted standard with 200 cu in. being a common size urn. However, as I understand it, bone size and density is more important than body weight as the cremation ash is mostly from bone. Mike Mahoney has a DVD on hollow forms and lidded vessels where he makes a small cremation urn. Its lid and collar is threaded. Mike demonstrates his thread chasing technique to create a good fit for a convential urn. Scattering type urns more often have larger lids.