Re: Why Are Combination Chucks Not Available in U.
mfoster
>Ditto what Richard said. I have one still kicking around in my shop. It came with a couple sets of jaws that will expand into a dovetail recess. I made this work and actually completed a lot of bowls with them, but they are a real pain to set up and fiddle with and are still nowhere near as strong or as accurate as even my worst scroll chuck.
I do find that I still will use the collet chuck that came with it. As Richard said the tenon (with a slight dovetail) has to be dead on to use it. He was really generous in saying that you have 1/4" of play. I would say more like 1/16". It will grip things well, and accurately, however you have a more tentative hold on the wood, and can't put a lot of force on it perpendicular to the lathe bed, or the wood will pop out. I saw Richard Raffan do a demo years ago in Phoenix. He used a chuck that he designed and sold. It was strictly a collet chuck that had 3 or 4 steps in it, so he had some choices in the size of tenon to grip, but it still had to be accurate. You could get his chuck for a while, but I haven't seen it in the catalogs for a long time. I still find that I pull this chuck off the rack once in a while, so I haven't chucked it :).
I used to use it for a pin chuck and a screw chuck pretty regularly, but only rarely now. I find that there are easier/quicker ways to hold the wood.
Don't know anything about it's availability or if it is even still being made. I think that it was made by Axminster in England. Check out Craft Supplies http://www.craft-supplies.co.uk/ or the Axminster site.