>I installed them while they were wet. I don't know if soaking made any difference. They seemed to bend a little better. I sure am glad they did not break. I am not sure I if I could turn another rod that small.
>That is excellent, Mr. Hines. Who woulda thunk it that you could bend black wood. I had no experience bending this type of wood but I find it to be so brittle I had no optimism for your success.
>As you can see there was not much bending. Just enough to get one of the out side post into it's hole. The first two were lined up but then bending was need to get the rods into the last post.
I spent almost a hour turning the rods and did not want to brake one.
I still have to turn small buttons to fill the holes on the under side of the lid.