Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

A Solemn Day

Posts

A Solemn Day

#1

A Solemn Day

Thad

>Well the 38 year old dryer I was given when in seminary has died for the second time this week, and SWMBO says no more repairs (There have been 5 already).

I think the old Maytag has served its time. So we're off for a new one.

The motor is still working fine though, so I'm curious if there has been any experience using the motor in the shop.

A deticated buffing machine perhaps?

Re: A Solemn Day

#2

Re: A Solemn Day

Fog Tanner

>When I was a kid, I took the compressor pump from an old icebox - back when they had piston pumps in them and the motor from an old wasking machine and made myself an aircomperssor and vacume pump. It worked either way. I have a grinder out in the shop that has an old washing machine or dryer motor on it and works great - I need to replace the power cord, but other that that it runs. Also another one that is on a really old Sears lathe.

Fog

Re: A Solemn Day

#3

Re: A Solemn Day

GalenV

>I just retired an old 1/3 hp GE motor originally from a washer. It powered my 6" spidle grinder for years.

38 years old it may still be a closed frame motor and could be used for your buffer.

Never paid attention to what a dryer motor rpm may be even though I have worked on them. Just put on belts or heating elements.

If it is an open frame or "frameless" motor like some are I would not use it.

Re: A Solemn Day

#4

Thad, I use old used motors on

Allen Neighbors

>nearly everything. I have one on my buffing system, one with a through shaft is a small grinder for odd things, One is a wire buffing wheel, One is driving my large exhaust fan. There are any number of things you can use an old motor for. It's probably not an enclosed motor, but you can enclose it, by making a tube that is loose fitting, with a dryer vent tube for getting air away from the motor, with a pancake fan blowing in. That will help to keep it clean. Just think like a redneck, and you can find a use for it. (grin)

Re: A Solemn Day

#5

Re: A Solemn Day

nick

>Your question reminds me of one of my favorite books, "The Complete Modern Blacksmith." The author, Alexander Weygers, was a sculptor who made his own tools and often recycled old junk into useful stuff. I found the book at Lee Valley but I don't think they carry it anymore. Anyway, if you want to read about how to make a grinder from an old appliance motor, check out Weygers' book. There are even plans for a woodturning lathe in it.

Re: A Solemn Day

#6

Re: An old motor

bill Crommett

>One of my grinding wheels is run by a motor from a mangle (who remembers them) that was bought in 1951.

Re: A Solemn Day

#7

That will iron those age wrinkles out

GalenV

>My aunt had one in the late 50's and iron a lot of cloths for people.

She had to chase us away so we did not get wrapped up by our little arms.

She also had the early version of the front loading washer. Funny they have now come back into age. Her's she sat a wash pan under the door to catch the leaks. Guess that is why you did not see again for many years. Hope the new ones are improved!

Re: A Solemn Day

#8

Re: A Solemn Day

john lucas

>He also has the $50 knife book that explains how to make grinders and polishers from used stuff.

Re: A Solemn Day

#9

Re: That will iron those age wrinkles out

Bob Macgregor

>When I was a kid, my mother used a mangle a lot; it always looked dangerous to me. My grandmother had a front-loading washer/dryer. I thought it was pretty neat that the one machine washed the clothes and then switched over to drying them, too.

BOB

Re: A Solemn Day

#10

Re: An old motor

Walt Didesch

>My wife is currently using a mangle for her dyed silk scarves that she sells. We got it at a consignment store for fifty bucks.

Re: A Solemn Day

#11

Re: A Solemn Day

BobM

>The first lathe I had was a Craftsman "tube type" and I powered it with an old washing machine motor. It lasted for over 10 years.

Re: A Solemn Day

#12

Re: A Solemn Day

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>My first lathe also was a Sears tube type, and I did some decent work on it. My wife GAVE it to her brother! When they heard about that, some of my woodturning buddies came up to me and said, "Oh so sorry that you're going through a nasty divorce!" (Actually, I had just purchased an upgrade to the mustard monster, so her giving the old one to her brother was fine. Claudia and I are happy together for nearly 43 years.) What bothers me, though, is that it's been about three years , and he still hasn't taken it out of the box I packed it in.

Re: A Solemn Day

#13

jim miles

Re: A Solemn Day

Jim Miles

>I was just given an old Sears tube type, without motor, plan to make it lathe # 3 for bottle stoppers and small stuff. Bought a treadmill for $15 at local Goodwill store- it had a little used 3/4 Emerson motor. I have a Delta jointer and shaper both with original motors that go back to at least 1945. Both Delta motors are rated 1/2 horsepower but are about twice the size of a "modern" motor.

Re: A Solemn Day

#14

Re: A Solemn Day

Barry Turner

>Our old Maytag only went 28 years. In our case, it was the washer that died. I sold the love of my life (1964 Chevrolet Impala Super Sports, 327 cu, 4-speed, etc.) to buy the washer and dryer after my wife and I got married. I got $600 for the car and had a little money left over after buying the washer and dryer. I wonder where the 1964 SS is today? By the way, I still have the wife after 38 years.

Re: A Solemn Day

#15

Re: A Solemn Day

don lewonczyk

>I'd almost say time to trade the wife for a newer model but I have one for 49 years and wouldn't trade her for a million bucks, hardest working woman I ever met plus she brings home a decent paycheck(sweet). Christmas day will be 50 years since I met her while I was home on leave, we got married the following August 7days before I left for North Africa. If you guys got a good one even with faults, we all have them, hang on to her they can't be replaced like a tool. DonL