Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Eli Avisera DVD's ???

Posts

Eli Avisera DVD's ???

#1

Eli Avisera DVD's ???

Ed Moore in SW Virginia

>Are any USA vendors carrying Eli Avisera's DVD's? I thoroughly enjoyed one of Eli's rotations in Richmond and wish I had attended others. I hope that his DVD's are as good as his demo. Any opinions if you have seen the DVD's?

Thanks,

Ed

Re: Eli Avisera DVD's ???

#2

Re: Eli Avisera DVD's ???

Ralph

>Ed, I asked Eli about this last summer, at that time the answer was no, and he didn't mention any plans to change that.

Re: Eli Avisera DVD's ???

#3

Rob Wallace

Re: Eli Avisera DVD's ???

Rob Wallace

>Ed:

I also saw one of his rotations in Richmond, and thought he did a good job. I haven't seen his video, but I just wanted to let you know that from time to time (at least every 2-3 weeks) several copies of his woodturning video (DVD) are offered on eBay by a seller in England (I think). Price, plus shipping, seemed a little steep (....although I'm fairly stingy!), but this may be the only show in town - I'm not aware of any vendors selling his video in the USA (I would have thought that Craft Supplies would have offered his video, given that they carry his blanks and candle holder cups). Good luck video hunting...

Rob Wallace

Re: Eli Avisera DVD's ???

#4

Re: Eli Avisera DVD's ??? *LINK*

Stephen Mushinski

>Ed,

I have posted a reply a couple of times and they have not appeared. ????

Stranged!

You can try a Toronto Canada turning store, he has most of them instock. WoodChuckers - the owner is named John


WoodChuckers

Re: Eli Avisera DVD's ???

#5

Thank you! I will see ...

Ed Moore in SW Virginia

>what I can do about obtaining these DVD's. I was hoping to allow family members to gift them to me at Christmas - especially since I am not easy to buy for. On to option B. [grin]

Re: Eli Avisera DVD's ???

#6

Re: Eli Avisera DVD's ???

Mike Brazeau

>Ed - We have them in our guild library and I looked at the Introductory set in late September. Looking at notes I made, I don't think that for an experienced turner they would not be worth the cost. He describes his convex skew grind and micro-bevels, both of which I have tried. I do want to look at the Advanced set though, as he does have some great design ideas. I have not had a chance to see one of his demonstrations, but have seen and heard several references to his work in the past few years.

Re: Eli Avisera DVD's ???

#7

Re: Eli Avisera DVD's ???

Ed Moore in SW Virginia

>Thanks, Mike.

I'm pretty comfortable with the tools I have and how they are sharpened, but he has some tricks that might be worth checking out. I would expect him to have different design ideas than I do since our cultures and experiences are quite different.

When I gave some thought to the rotations that I saw in Richmond I realized that the ones I liked best were strong on teaching. Richard Raffan, Mark St Leger, and Eli all taught how they did things and they were very professional in their approaches.

Ed

Re: Eli Avisera DVD's ???

#8

Re: Eli Avisera DVD's ???

Ed Karch

>Also at www.canyon studios.com

Re: Eli Avisera DVD's ???

#9

Re: Eli Avisera DVD's ???

KTMP

>All of Eli's films can be ordered through our website, where you can find all details and plan downloads for his projects.

Some may find the prices expensive, but they have been adjusted to take the strong US Dollar to the UK Pound rate now and should be bearable. The films most certainly are worth their price!

The website is at: www.ktmp.co.uk

Cheers!

Karl Tickle