Copying The Masters (long) *LINK*
charlie belden
>Once upon a time - you apprenticed to a master. Later it was considered proper that one copied the masters BEFORE developing one's own style.
It use to be that budding artists would go to art museums and draw or paint copies of the masters while looking at the original - sometimes looking VERY closely at the original. The idea was to study the lines and even the brush strokes, as well as the consistency of the medium being used. We're talking details here. And they would often have a notebook and take copious notes about what they thought were the techniques used.
With a hard won repetoire of styles, proportions, lines and strokes, and an understanding of the medium used as well as the tools as a wonderful foundation - THEN all that could be applied to creating original works.
Then folks like Jackson Pollock came along. Now don't get me wrong, his stuff is really interesting to study - up close - preferably looking at an original because prints can't really give you the 3rd dimensions his works have. Hell, some of Picasso's paintings - done mainly with a pallet knife - border on sculpture - with quarter inch relief in places.
The trend seems to have gone away from the balance of concept AND technique - moving towards an emphasis on CONCEPT and SPONTANEITY over technique and execution.
This trend seemed to be spilling over into turning - the "charred" angular block of wood with the Painted Red Hemisphere turned into one of its faces which "graced" the cover of an AAW quarterly magazine being a prime example.
I'm putting together a page or two on a demonstration Graeme Priddle did at our wood turning club. I took notes and a fair number of photos - some while holding a piece in progress as well as a finished version. Now I'm putting together some How It's Done illustrations and am really studying the photos, filling in details from memories of actually seeing and holding some of the pieces, and watching - up close - some of his "carving" techniques (which he does with a all sorts of cutting burs). And there are many "little things" which go into his pieces - which aren't in any way obvious in photos of the finished works.
Now I'm thinking about actually trying to turn and carve a piece like his double intersecting arcs "shield" shaped "Starfish Vessels" just to fill in details of the process which can only be gotten by DOING. Hell, I may even make and try his Wood Vaporizer.
And since I like multi-center turning I'm working on illustrations of a Cindy Drozda three intersecting arcs lidded box. I've actually turned a half dozen after studying my notes and photos from her demo at our club and doing illustrations of the procedure. And now I'm using a primitive CAD program to look at the proportions of one of her pieces - working out where curves start, end, and how the blend into each other, starting with a digital image of the piece. (see attached pic).
In the process of studying these pieces I'm learning a great deal - which I may, or may not ever use again. Then again . . . I guess I'm in the Steve Jobs camp - "If you're going to steal ideas - steal from the best". Actually, I'd rather see it as "Copying is the sincerest form of flattery.".
SO - have YOU really studied a piece you really found interesting, and maybe even "flattered" the maker by maing a copy? If so, got any insights from the experience you'd care to share?
charlie belden
Scroll Down To The Starfish Pieces





