Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Spalted Maple Lidded Bowl

Posts

Spalted Maple Lidded Bowl

#1

Spalted Maple Lidded Bowl

davidwalser

>Here are some pictures of my most recent project, a small lidded bowl made out of maple, spalted maple, and redwood. The bowl is 3.5" in diameter and 2.75" tall.


img

Re: Spalted Maple Lidded Bowl

#2

2nd pic

davidwalser

>Another view:


img

Re: Spalted Maple Lidded Bowl

#3

3rd and last pic

davidwalser

>View of the inside.


img

Re: Spalted Maple Lidded Bowl

#4

Re: Spalted Maple Lidded Bowl

Dan Oliphant

>Very nice piece. The combinataion of woods you used is outstanding

Re: Spalted Maple Lidded Bowl

#5

Re: 2nd pic

John K Jordan

>I love this side view. It's almost like a mural, full of motion, framed by the wood. The textures and colors compliment each other nicely.

JKJ

Re: Spalted Maple Lidded Bowl

#6

Re: Spalted Maple Lidded Bowl

Carol - now back in Dubuque, IA

>Lovely, David. Just lovely. Especially the side view.

And you've given me a great idea. I have a small piece (guitar cut-off) of intense birds eye maple. Its not enough for a stand alone project, but sandwiched and framed like you have done, maybe.

Thanks. Great idea for special pieces of wood.

Re: Spalted Maple Lidded Bowl

#7

Re: 3rd and last pic

Allen Neighbors

>David, that's a beautiful little box. The contrasting wood is nice too. I have some spalted maple, but it's pretty far gone in some places.

Did you have any trouble with soft spots in this, places that you had a lot of trouble with tear out?

You did well. :)

Re: Spalted Maple Lidded Bowl

#8

Re: 3rd and last pic

davidwalser

>Allen,

Yes, I had a lot of trouble with the spalted maple. The wood was so far gone that little pieces would crumble off whenever I touched it. So I soaked it in MinWax Wood Hardener before I glued up the blank. I still had to resort to thin CA glue before making my finish cuts, but the MinWax Wood Hardener helped a lot. I even found it necessary to apply CA glue before sanding -- the soft parts of the spalted maple wore away much more quickly than the rest of the bowl. Thanks for the question.

Re: Spalted Maple Lidded Bowl

#9

Re: 2nd pic

davidwalser

>John,

Thanks for the kind words. They are encouraging and mean a lot to me.

Re: Spalted Maple Lidded Bowl

#10

JL

Very pretty.

JL

>

Re: Spalted Maple Lidded Bowl

#11

Re: Spalted Maple Lidded Bowl

Jim Shaver - Oakville, Ont

>Beautiful

Jim

Re: Spalted Maple Lidded Bowl

#12

Re: Spalted Maple Lidded Bowl

davidwalser

>Thanks to everyone who commented. I appreciate the insights and encouragement.