>Here's a small 3" diameter, 3" high Tasmanian Blackwood hollow form. Finish is Deft's Danish Oil. I must say I like Deft's oil a thousand times better than Watco's. The HF is hollowed a little less than 1/8" thick.
>It seems to build faster and provides a better finish. I think it comes down to "less thinners" and more of what we want. It would take me 4 coats of Watco to get what I get with 2 coats of Deft. On a scale of one to ten, I'd give Watco's Danish Oil a 2-3, Deft's 6-7, and (just for comparison) Waterlox's Sealer/finsh red label a 9-only thing that keeps Waterlox from a 10 in my book is the price and the issue with it going bad/gel. Deft's isn't quite up to Waterlox but it's a fraction of the cost and gets pretty close.
>That is a pretty little thing. Something about your photos is not quite right Greg, at least on my monitor. They look almost foggy like there is a film in front of the piece. I may not be describing the effect correctly but they are not as clear as some of yours I have seen. When you do pretty work like this you need the best photo you can get.
>Damn thats more like it, Mike you were right, I thought the same thing, the shape was was right but it looked dull. John you are to smart to be a hillbilly farmer but thats a lot better then being a flat land farmer or should we call ourselves ranchers? I don't have a flat spot on my place, its murder to put up a building just finding the rigth spot is tough. Take Care and Happy Thanksgiving to all you WC'ers. DonL
We are fortunate to have plenty of reasonably flat land! My wife looked for years for a retirement place and most of them would do a hillbilly proud. When she showed me this place it was perfect: fairly new house and old barn just 3 miles out of town on 27 acres of mostly gently rolling hilltop on a dead-end lane. And even better, it was so grown up with privet and briers that the seller got no offers so the price was right.
The satellite photo below is from before we moved in. Since then I've added fencing for livestock, more buildings, fenced-in garden, apiary, sawmill yard, and cut a new driveway across the upper field and through the woods. I cleared a spot recently for a new horse barn and had to cut and fill no more than a couple of feet overall!
Being on a hilltop, the only downside is we don't have a stream. There is utility water and I fill a cistern from the barn roof, but I'd like to put in a well someday.
I have a friend about two miles from here that has 40 acres. There's not a flat spot on the place except under the house and the barn. Even turning a trailer around on his place takes a special talent.
BTW, manipulating graphics is easy for me - I did that for many years as part of my job. Good fun, but I'd rather be outside or in the shop. I haven't cleaned off the desk in front of my computer monitors since I retired two years ago.
>You are fortunate John you have a place some people would kill to have, I also feel good about my place it was in about the same shape as yours. Stumps everywhere, big gullies, grown up hedgerows and as in your case no one wanted it with the work involved to clean it up. I can bushhog the whole place but some of the spots will give you the pucker factor if you know what I mean. I know you are well read and well versed and its always a pleasure conversing with you, I guess I'll have to change your description from hillbilly to a gentleman farmer. I like your Kubota with the forks, I have a set on mine they are the skid loader tech that are a snap to change. Take Care and always a pleasure. DonL