>Being a fairly recent newbee to turning, I have been trying quite a few different kinds of projects. This is my first attempt at a thin winged object. I had some 3/4" cherry end cuts from the kitchen cabinets I made, so I tried a winged mini bowl. I learned that thin sections vibrate and tool control and good lighting are a must. The finish is Deft and wax.
If you are having trouble with vibration add some struts like in the picture ,if you'd like to know more about my method of suport feel free to email me at timberly@xtra.co.nz
>The wings are being supported so they don't flex .This enables you to turn the wings very thinly because the bevel is still able to be rubbed against the wings as they are supported
I'm glad you got your photo posted. One suggestion - if the photo is too big it's hard to see since it runs off the screen. This one is pretty big at 2304x1728. If you resize the picture to about 640 pixels across before saving it, you'll get two advantages: one, it will fit nicely on almost everyone's screen, and two, it will look sharper.
I like your inclusion of the candy kiss for size - that turning is tiny! (unless the candy is oversize :)
>These are really nice. I think that if you made one like the one on the left, but made the opening on the other, concave side, that it would be pretty with a little tea light in it.
>Like KJK says, you need a picture about 640 X 480. This can easily be accomplished with a free program called Fast Image. It will do nothing else but re-size your pictures --- That is why I like it.