Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Man I'm exhausted, smiling but tired

Posts

Man I'm exhausted, smiling but tired

#1

Man I'm exhausted, smiling but tired

john lucas

>I had a really good day. Turned an ornament for a commission. Then I built 2 metal adaptors for work. While I was at the Mill I decided to make a really big Hunter tool to experiment with. It's 14" long, 3/4" in diameter and tapers at the front to 1/2" to hold the #4 cutter. I'm not sure how effective this tool will be but has to be easier to control than the thinner tools. How it compares to my scrapers that are this size has yet to be tested.

I put the finishing touches on a Hunter tool Demo DVD for Mike Hunter. I had to learn every bit of Pinnacle by trial and error. I have never seen a book that is so poorly written. I could not find decent instructions on how to do anything.

then I cleaned the shop from top to bottom. It needed it. Now I need to get started on the next 2 commissions and get them out of the way.


img

Re: Man I'm exhausted, smiling but tired

#2

Dick Hines

Re: Man I'm exhausted, smiling but tired

Dick Hines

>John, when do you find time to eat or sleep? Just reading your post made me tired.

Re: Man I'm exhausted, smiling but tired

#3

Re: Man I'm exhausted, smiling but tired

Texian

>John,

Your "home made" tools look a LOT better than my home made tools. Nice work.

Re: Man I'm exhausted, smiling but tired

#4

I have to get ready for a demo

john lucas

>I just remembered I'm doing a demo on Tuesday for a woodworking guild on tool making. I'm going to relax a few minutes and then head back out to the shop and get ready for that. I have a club meeting tomorrow night so I won't be able to do it tomorrow. Fortunately getting ready for that will simply be gathering up all the homemade tools and then some supplies to do the heat treating demo and discuss bending, cutting and tapping threads.

Fortunately there are a bunch of turners in the club so I can take some of the turning tools I make.

Re: Man I'm exhausted, smiling but tired

#5

Re:You will quickly come to love .....

Jamie D

>....this size shaft for the Hunter tool John. I have been using a similar version for my demos this fall, and it has much less tendancy to chatter when hogging out hollow type forms.

Re: Man I'm exhausted, smiling but tired

#6

Re: Man I'm exhausted, smiling but tired

Don wilcut

>John, be sure and bring that tool and a spare to the TAW. If I don't have to take out a loan, I'll buy one.

Don

Re: Man I'm exhausted, smiling but tired

#7

Re:You will quickly come to love .....

john lucas

>Jamie This was a modification of your tool. I lowered the cutter closer to the center line of the tool. I think it is more controllable. I'm going to round the bottom more so I can rub the bevel easier in more rounded pieces.

Re: Man I'm exhausted, smiling but tired

#8

Re: Man I'm exhausted, smiling but tired

Barry Turner

>So, John....who are you really? Woodturner? Photographer? Machinist? Toolmaker? Videographer?

Re: Man I'm exhausted, smiling but tired

#9

How about jack of all trades master of none

john lucas

>

Re: Man I'm exhausted, smiling but tired

#10

Re: Hunter tool Demo DVD

Dinyar Chavda

>Hi John/Mike:

How does one get this?

Re: Man I'm exhausted, smiling but tired

#11

I'm tired after reading your accomplishments...

Michael Stafford

>

Re: Man I'm exhausted, smiling but tired

#12

Re: Hunter tool Demo DVD

john lucas

>Dinyar This is just a mild modification of the Youtube video I did a few weeks back. I shortened it and added a title. If you go to youtube and do a search for Woodturning Lucas you will find the longer version. I'm doing this to help Mike with promotion.

Re: Man I'm exhausted, smiling but tired

#13

Re: How about jack of all trades master of none

Barry N. Turner

>I KNOW that's not true............