Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Four in one

Posts

Four in one

#1

Four in one

Terry Scott

>[IMG]http://i447.photobucket.com/albums/qq191/timberly2458/4inonelidsoff.jpg[/IMG]

This piece made from Rimu was a bit of a challenge

The aim was to turn 4 boxes still connected in the middle from one bit of wood

firstly I had to mount on a backing board screwed up from the bottom

Then a counter balance system was added on another large MDf face plate

The insides were first turned after cutting of a slice for the tops to be made latter on

I was then able to turn down from the top of each box leaving a 20mm x section in the middle

flipped over then came up to meat the x in the middle

next teh lids were turned and fitted to each of the four boxes so they fit with that satisfying pop

Comments welcome


img

Re: Four in one

#2

Re: Four in one

Cyril Griesbach

>"A bit of a challenge"? Terry, you're a master of understatement as well as a master at finding ways to do the seemingly impossible. This is an outstanding example.

Re: Four in one

#3

a cool challenge

GaryG in MD

>Hi Terry,

Glad to see you posting on WC now too.

You set an interesting challenge for yourself and solved it beautifully. Tremendous imagination. Thanks for the view and the explanation.

Looking forward to seeing more of your unique pieces, Gary

Re: Four in one

#4

questions

Steven Kubien

>Hey Terry,

I understand the mounting to allow you to hollow each "can". What I cannot wrap my head around is how the outside of each one is done, especially the inner half of the diameter. What sort or tooling is used for this? If it is just a gouge, what is the presentation to the wood?

Fantastic stuff!

Steve Kubien

Ajax, Ontario