Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Jet riser blocks

Posts

Jet riser blocks

#1

Jet riser blocks

john lucas

>I've been meaning to explore this with my Jet mini so here are some photos of the riser I made this morning. It took about an hour to make all the parts. I glued up some baltic birch plywood and then cut it to the proper length and width for the headstock and tailstock. Then I cut dado's in both sides. One is for the tailstock to fit and the other is for a piece of wood that will fit in the lathe bed gap. I glued the wood into the riser block.

Then I drilled a 1" hole for the tailstock locking bolt. I have a lathe and mill and could have just made a new longer locking bolt to replace the original but decided instead to make a short connecting bolt because this is something you could make with a drill press, 10mm metric tap.hacksaw and a file. I drilled a 5/8" piece of steel rod and filed flats on 2 sides. Then hacksaw'd it off tapped it for the 10mm. I threaded a nut and the new connecting bolt onto the original tailstock lock. Then I cut a short piece off a 10mm bolt and inserted this thread onto the connecting bolt. Reassemble everything and I'm done.

I'll drill and glue up the riser for the headstock on another day. When done I'll have a 12" jet mini.


img

Re: Jet riser blocks

#2

Re: Jet riser blocks 

john lucas

>


img

Re: Jet riser blocks

#3

Re: Jet riser blocks

Sean Troy

>Where do you find the time? It's like your some secret Gov. robot project :)

Re: Jet riser blocks

#4

Re: Jet riser blocks

John K Jordan

>What a great idea, especially for the bolt extension. I wonder if I can do that to a mini so it will accept a Baxter threading jig made to fit my Jet 1642. (BTW, I acquired a second Jet mini the other day and can afford to experiment!)

JKJ

Re: Jet riser blocks

#5

Re: Jet riser blocks

john lucas

>John I think it would work just fine. All you would have to do is raise the headstock.

Re: Jet riser blocks

#6

Re: Jet riser blocks

john lucas

>Sean That's funny because I feel like I waste too much time. I sitting on my butt watching the Woodwrights shop but that is necessary because it's too cold in my shop. It was 45 this morning after running the heater all night. I really need better insulation but would require some very extensive and probably expensive work so for now I'll just get buy.

Re: Jet riser blocks

#7

Sean, I've thought along...

Allen Neighbors

>those same lines, when it comes to John's efficiency. But you said it well, Friend!! :o)

Re: Jet riser blocks

#8

Re: Jet riser blocks

Allen Neighbors

>John, you constantly amaze me by the things you come up with. Nice job.

Will there be enough movement in the wood, to make a difference in the efficiency of the risers?

Looks good to me! :o)

Re: Jet riser blocks

#9

Re: Jet riser blocks

Mike Brazeau

>You never cease to amaze me John! Will you use a belt from the 1220 for the headstock?

Mike

Re: Jet riser blocks

#10

Banjo/toolrest reach?

wilbur

>Hi John,

Do you foresee any problems with the reach of your banjo/toolrest with the increased swing? I had considered this with my old Walker-Turner lathe, but ultimately bailed on the idea because it didn't seem like I would be able to get the banjo and toolrest to accomodate the extra capacity.

Re: Jet riser blocks

#11

Suggestion/question

Bill Houghton, sunny in Sebastopol, CA

>A 10mm thread is slightly larger than a 3/8" thread. Might it have been possible to use a 3/8" connector nut from your hardware store, retapped to 10mm, with a stud made from a 10mm cap screw threaded into half of it?

Re: Jet riser blocks

#12

Part Two Posting on Sunday?

GalenV

>Like Mike noted better get that 1220 belt on order. Will be interesting to see how you get the headstock riser with the bolt pattern and cutout for belt made up. Will look for part two on Sunday.

And gee I would have sold you my 1220 for only $600 :-)

Re: Jet riser blocks

#13

JL

What level do you set your rest at?

JL

>I've never set the post up to it's full extension. I've got another 3/4" or so to play with on my normal large tool rest. I've got maybe an 1" or so on my round bar rest.

Re: Jet riser blocks

#14

Re: Jet riser blocks

Wally Dickerman in Arizona

>John, IMO the Jet mini, and in fact all minis have motors that don't have enough HP. I've stalled the Jet while turning a 7 inch bowl when taking a moderately heavy cut. If, by increasing the swing on the mini you plan to turn larger pieces, won't this be a problem?

Wally

Re: Jet riser blocks

#15

Re: Jet riser blocks

Sean Troy

>John will probably have a 3HP on that before to long :)

Re: Jet riser blocks

#16

Re: Jet riser blocks

John K Jordan

>>John will probably have a 3HP on that before to long

No, he's just upgrading his spring-pole lathe.

JKJ

Re: Jet riser blocks

#17

Re: Jet riser blocks

john lucas

>Mike I can by 6 land belts from my local bearing supply house. Then I split the down the middle and I have 2 of any length I need.

Re: Jet riser blocks

#18

Re: Suggestion/question

john lucas

>Bill I thought about doing just that but was out of connectors in that size. I also thought about just welding a 10mm bolt to that one but decided I wanted to leave the original lathe as is in case I ever wanted to convert it back to 10" swing.

Re: Jet riser blocks

#19

5hp VFD powered by a treadle :)

john lucas

>Wally I could not agree more. When I do bowl demos on the jet mini's I am constantly frustrated by how small a cut I have to take, and that's on 8" bowls. This lathe had a bad motor so my plans are to install a 3/4 horse VFD. This mod was done to answer someone's questions on the AAW site.

I plan to make metal risers later on just to learn how to do that kind of machining. This is a project lathe like the last Jet that I had. I'll add indexing and a larger tailstock locking plate. I'm also thinking about changing it to 1 1/4x8 thread so it matches my other lathes. I might as well have fun with it. I can't sell it for enough to make any money.

Re: Jet riser blocks

#20

Re: Jet riser blocks

keith zimmerman, Normal IL

>What an great idea John. I can't wait to see how you design the headstock riser. If I only had the expertise, I might try something like this myself. Alas, I don't, so I'll just have to be satisfied with reading about how your works. Now, if you ever decide to go further with this concept, I would be interested. I was really disappointed when Jet came out with the 1220 instead of a 1214. The extra 6" makes a difference for me.

keithz

Re: Jet riser blocks

#21

Re: Jet riser blocks

don lewonczyk

>Nice John, I was thinking about making a riser for my tail stock for my 3520B PM. I have the 18" extention mounted on the lower holes so I can do larger turnings but no way to support the piece with the tail stock. Don Butler who makes the swing away for the PM has the top slides that I could mount to a riser block but I couldn't explain to him in plain english what I wanted to do. I quess I could use angle iron for the ways and maybe its not worth the effort but I'll mess with that for awhile. Again nice job. DonL

Re: Jet riser blocks

#22

Re: Jet riser blocks

john lucas

>I'll see Don in January at the TAW symposium. If I remember I'll ask him about that. One of the things I want to do is convert the legs on my 3520A to take bed extension. If I do that I will want to try the tailstock option. A riser block made out of MDF should be easy to build but I would have to look at the locking mechanism because I can't remember how it works. I think it's just a bolt through a plate so it shouldn't be hard to jury rig.

Re: Jet riser blocks

#23

Re: Jet riser blocks

john lucas

>I don't know if I'll get the riser done for headstock today. I have to buy longer metric bolts and they won't have them at Lowe's. I've got other jobs to finish before this one anyway. The extra pieces laying in the dissassembly photo are the pieces for the headstock riser so all I have to do is drill the holes install the longer bolts and buy a longer belt.

Re: Jet riser blocks

#24

Re: What level do you set your rest at?

wilbur

>The limitation I had was not so much tool rest height as it was getting the tool rest out far enough to get around the larger blank that the extra capacity would allow. (Horizontal reach, not vertical.