Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

tip for finishing peppermill tops

Posts

tip for finishing peppermill tops

#1

tip for finishing peppermill tops

Steven Kubien

>Hey there,

I was working on a peppermill today, using a traditional grinding mechanism (not a crushgrind). Typically I turn a small tenon on the bottom of the cap which will sit into the main body and help keep everything aligned (I know some people don't do this and have the top and body meet flush).

Today, I made the tenon a size which fit directly in between the gripping capabilities of all of my chuck jaws so I had no way to hold it while I sanded the very top. Pen-makers gear to the rescue! The bushings from an Olympia pen fit the 5/16" through hole I had so I was able to hold the top on my pen mandrel and sand away. It worked great!

There are probably tonnes of you who already do this but for the one or two of us slowheads, I hope this helps.

Cheers,

Steve Kubien

Ajax, Ontario

P.S. Pics of the mill (and its friends) to follow when they are dry.

Re: tip for finishing peppermill tops

#2

Re: tip for finishing peppermill tops

Barry Turner

>Good save! What about a jam chuck?