Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Marbling some turnings

Posts

Marbling some turnings

#1

Marbling some turnings

Cyril Griesbach

>During last weeks chat I asked about marbling as a group of us were going to give it a try this week. Several of the chat participants asked me to post some photos so here they are. These pieces are, of course, not finished, the photos not that great because of the circumstances and my distinct lack of photo skills. These pieces are right out of the paint bath.


img

Re: Marbling some turnings

#2

Re: Marbling some turnings

Cyril Griesbach

>Another one. This one got a base coat of Yellow on the rim prior to the dip.


img

Re: Marbling some turnings

#3

Re: Marbling some turnings

Cyril Griesbach

>The last one...still wet and on the chuck.


img

Re: Marbling some turnings

#4

Re: Very interesting Cyril, and this one...

Jamie D

>.. has a ruffed grouse head in that dark area!

Re: Marbling some turnings

#5

Re: Marbling some turnings

Greg Haugen

>Beautiful work Cyril! Very nicely done! Marbling is alot of fun. I do a fair amount of two piece maple "marbled" tops. There's a picture of some older ones in my WOW gallery.

Greg H.

Re: Marbling some turnings

#6

Re: Marbling some turnings

Cyril Griesbach

>Thanks, Jamie. I see it now that you pointed it out. You would know most of the UB6 because they were at the hands on. By the way, I'm looking at the Canon SX 10 IS. What do you think? The Olympus we checked out didn't seem able to do what is needed.

Thanks, Greg, I'll go check that out on WOW. This is just a first time experiment for us and we'll revisit it in about 4 more weeks after learning some things on Monday. Next time our little group gathers we're going to mess with the Hunter and other similar tools.

Re: Marbling some turnings

#7

Re: Marbling some turnings

Cyril Griesbach

>Greg, how about this one?


img

Re: Marbling some turnings

#8

Very nice!-Beware it can be addicting. :-)

Greg Haugen

>

Re: Marbling some turnings

#9

Wow man, did we fly back to the 60's?

keith zimmerman, Normal IL

>This is an interesting effect Cyril. Not at all what I was envisioning when you spoke of it in the chatroom last week. You have created a psychedelic look of the late 60's in this, reminicent of Rowan and Martin's Laugh-in. I had envisioned something more like the classic Italian marble look. Think I was a bit off? And I grew up in the late 60's too.

keithz

Re: Marbling some turnings

#10

Steven Antonucci

One pass with the gouge to clean out the paint

steve antonucci

>on the inside, and probably one on the outside for overrun?

Cool effect.

Steve

Re: Marbling some turnings

#11

Re:Cyril- that looks like a lot of .........

Jamie D

>...camera for the money. Check out the reviews at dpreview.com for any additional specs as well as other products that might be of interest.

Re: Marbling some turnings

#12

Re: One pass with the gouge to clean out the paint

Cyril Griesbach

>You're on track, Steve. These are not finished and will have to be remounted to clean up the overrun. The paint should also be given a coat or two of lacquer to protect it prior to returning to the lathe. If you look closely at the one mounted on the chuck you will see a slight groove near the top (there are two but I'm not sure the top one shows) where this fellow intends to cut the area between the grooves back to wood.

Re: Marbling some turnings

#13

Re:Cyril- that looks like a lot of .........

Cyril Griesbach

>Thanks, Jamie. I'll check that out.

Re: Marbling some turnings

#14

Re: Marbling some turnings

Michael Stafford

>Cyril, the first one is my favorite as the colors are not as garish as they are on the other pieces. Of course that is a matter of personal preference. The muted colors suit the rim of the small platter better. Interesting work nevertheless.

Re: Marbling some turnings

#15

Re: Marbling some turnings

Cyril Griesbach

>Mike, I think that may be because that first one was dry and the others were still wet from the rinse. I'm not sure how that will change with some finish on them but as I said we're experimenting. I appreciate your interest.

Re: Marbling some turnings

#16

Re: Marbling some turnings

Don Orr

>These came out very nicely, especially for the first attempt. Thanks for posting the pics. I was in that chat but forgot you were doing this project. Good work.

Re: Marbling some turnings

#17

Re: Marbling some turnings

Terry Scott

>I watched Del stubs do some marbling when he was in NewZealand

I must put this on my one day Ill have a go list .the effect you archived is way cool

Cheers

www.timberly.co.nz