Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

22 degree angle ?

Posts

22 degree angle ?

#1

22 degree angle ?

john lucas

>I was looking (OK drooling) over the new Packard catalog and saw an angle measuring gauge called the Woodcut Tri-Gauge. It said it has the angles needed to check gauges and scrapers. it has 55, 35 and 22. Anyone know what the 22 degrees is used for.

Re: 22 degree angle ?

#2

Re: 22 degree angle ?

Greg Haugen

>John, the only thing I can think of would be a skew but that's a tool I'd think a gauge wouldn't be necessary. Maybe one side, not the bevel but the shaft of the tool is placed on the gauge and the other side of the bevel is checked? I have no idea. I've also seen some french bedans with some intense angles as well.

Yeah, that doesn't seem to be a common angle.

Not much help, I know.

Greg H.

Re: 22 degree angle ?

#3

Re: 22 degree angle ?

Brian Hahn in SW Wisconsin

>My best guess is for a skew.

Personally, I don't use any of the angles on that gauge.

Re: 22 degree angle ?

#4

Re: 22 degree angle ?

Russ Fairfield

>I grind a spindle gouge to something close to 25 degrees. Try it sometime. Wicked, but sweet once you get control of it.

Re: 22 degree angle ?

#5

Re: 22 degree angle ?

arkie

>Carving tools?

Re: 22 degree angle ?

#6

Keith Tompkins

Re: 22 degree angle ?

keith tompkins

>Me too Russ. It gives a long bevel to ride on.

Re: 22 degree angle ?

#7

Re: 22 degree angle ?

Texian

>Also drooling. Dunno about those angles though. I grind my stuff very precisely to "that looks about right" degrees. Seriously doubt that I could feel the difference between 55 and, say, 57 degrees, although some probably can. Aren't hand plane blades ground to 22?

Re: 22 degree angle ?

#8

Dennis in Southern Oregon

Re: 22 degree angle ?

Dennis in Southern Oregon

>Hey, 22 is awfully close to 22.5, which is 1/16 of a circle. I am not a segmented vessel turner, but I would guess that a 22.5 degree angle would be useful there. The "22" may just be an abbreviation for "22.5"

Dennis

Re: 22 degree angle ?

#9

Crown Moulding? :o)

Allen Neighbors

>

Re: 22 degree angle ?

#10

Irish Grind ?

Texian

>Recall someone on another forum mentioned 22 degree angle in connection with an irish grind gouge. The way it was stated, I did not understand if he meant a 22 degree included bevel angle (oooow, sharp).

Re: 22 degree angle ?

#11

Re: 22 degree angle ?

Bob Macgregor

>A wild speculation: any grinds at 68 degrees (90-22) that the gauge would work for?