Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

question about color...

Posts

question about color...

#1

question about color...

GaryG in MD

>I'm getting into coloring. I've tried RIT with some success, but I'd like to try some alternatives. I'm aware that many use various "spirit dyes." I'll probably try that too.

The thought that came to mind is the following:

We use a lot of oil finishes.

Artists use oil paints.

I have a number of leftover tubes of oil paints.

Has anyone tried using a tad of oil paint in Watco?

My idea is that is would be like a wash that would soak in, not anything that would just sit on the surface. The idea, obviously, is to pop the grain and accentuate the features (such as curl, birds eye, etc.) with the color.

I can guess that one reason for not doing this is that it might take a while to dry.

Another might have to do with the color fastness -- I'm not sure about the light sensitivity of a typical artists' oil color.

Are there any other reasons for not doing it.

There might be, because I've never heard of anybody doing it.

So what's the story? Yea or nay? ...Gary

Re: question about color...

#2

Re: question about color...

kirk constable

>I stained a mahagony table with artist' oil paint years and years ago. Worked just fine.

Re: question about color...

#3

Re: question about color...

GaryG in MD

>Thanks, Kirk; that's encouraging. ...Gary

Re: question about color...

#4

Re: question about color...

Carole Valentine

>Gary, I used some oil pigment in Watco a few years ago to experiment. I did not like it, but I don't remember why. (Us old folks seem to have that problem!) Best thing to do it sand some wood to a finish surface and try swatches of various mixtures to see what you come up with.

Re: question about color...

#5

thanks Carole...

GaryG in MD

>Ok, there's one thumbs down.

I'm guessing there must be come drawbacks or I would expect to have heard more about it. Thanks. ...Gary

Re: question about color...

#6

Re: question about color...

Brian Hahn in SW Wisconsin

>The lightfastness of artist oils, acrylics, inks and watercolors is excellent. Many of the pigments will show little or no change after a century. Woodworking dyes are fugitive by comparison. (I've done a few fade tests.)

I've applied a thin wash coat of artist acrylics to figured wood to pop the grain. They pop the grain almost as well as a dye and can be sanded back more easily than dyes to further accent the grain.

Quality artist paints have two big advantages: the pigments milled very, very fine and the pigments are lightfast. Of course the price reflects these advantages.

Re: question about color...

#7

I tried it

Ron in Drums PA

>It works. Oil colors are basically raw linseed oil and pigment. Lightfastness is excellent. Thinned down many colors can be transparent.

As always, experiment on scrap.

Re: question about color...

#8

Re: question about color...

john lucas

>I have not tried it but wood carvers do it all the time. I don't know if they use Watco but they do mix it with oils. It seems like Acrylics diluted with either water or what is called Flow medium or Extending medium are what they use the most.

Re: question about color...

#9

Re: question about color...

don lewonczyk

>The acrylics dry very fast,they don't soak into the wood, the water raises the grain also. If you use acrylics seal the wood first with a wood sealer make sure you have done all your final sanding before doing that. You can use an extender to retard the drying time so you can blend different tones or shades of color. The paint forms a plastic like finish and is very durable. You can also put a coat of acrylic varnish which I have done on some pieces but others I haven't, looked good either way, the varish just adds a little protection and also will tone down the brite colors if you use the matt finish. Experiment like the others have said and of course not on the piece you are doing, work with semi transparent washs, wait for each wash to dry, build it up in layers. I have an airbrush but didn't get around to using like a paintbrush artist would but I see alot of turnings that a paint brush was used and they were impressive. Get a book on basic acrylic painting about $15, walmart has most of the supplies. Good Luck, DonL

Re: question about color...

#10

2 more cents

nick

>I've used artists oils to color grain filler. Standard procedure, as far as I know. The colors will stain the wood unless you seal it up good before applying the filler.

Re: question about color...

#11

Re: question about color...

GaryG in MD

>Thanks Brian. That sounds good. This is what I was looking for. I think I'll give it a try. ...Gary

Re: question about color...

#12

Re: I tried it

GaryG in MD

>Thanks; sounds perfect -- I'll do it. ...Gary

Re: question about color...

#13

thanks john and don...

GaryG in MD

>My plan is to use oil this time (I've already got the first coat of Watco on the piece), but I'll keep the acrylics in mind, too, for the future. Thanks for the details. ...Gary

Re: question about color...

#14

Re: 2 more cents

GaryG in MD

>Thanks Nick -- that's good to know. In my current case, that's exactly what I want. ...Gary

Re: question about color...

#15

Re: Using RIT Fabric Dyes

gtwilkins

>I have started to dissolve the Rit dyes with alcohol so I wouldn't get the grain raising problems of using water. The alcohol dissolves the color portion of the dye but leaves the fillers and binders as a sediment.

I decant off the alcohol and have had great success with the reds, blues and purples, the yellow and greens tend to fade over time.

I have also used the concentrated alcohol based dye to color shellac which makes it easy to apply wash coats or pad on color in various areas.

A lot cheaper than buying specialty analine dyes.

Trevor

Re: question about color...

#16

Re: Using RIT Fabric Dyes

GaryG in MD

>Thanks Trevor. That's very good info. It sounds like a good technique, but it's a shame the greens and yellows don't last (I'm planning to use green or blue-green for my next project). I wonder if they last when used with water? ...Gary

Re: question about color...

#17

Very Interesting

Barbara Gill, Remlik VA

>I have only tried using dye on one piece. I hated it but someone else loved it. LOL

The alcohol method is very interesting.

Re: question about color...

#18

Whoops, Posted Under Wrong Response

Barbara Gill, Remlik VA

>

Re: question about color...

#19

Re: Using RIT Fabric Dyes

Barbara Gill, Remlik VA

>I have only tried using dye on one piece. I hated it but someone else loved it. LOL

The alcohol method is very interesting.

Trevor, about how much alcohol do you use per package?

Re: question about color...

#20

Re: Using RIT Fabric Dyes

gtwilkins

>I have been using about 8 ounces or so, I give the mixture a swish about and let it sit for 5-10 minutes then decant the alcohol, if the sediment still shows some color I will put in another 4 ounces and repeat. The binders and fillers are white when you have extracted all the color.

I was using the dye on children's toys with a shellac wash coat to seal them, the green lasted 2-3 years but gradually started to brown when it was sitting in sunlight. If you used a UV protected poly as a finish I imagine it would last a lot longer.

As I was dying small parts and ornaments I made dye pots out of PVC pipe with an end cap on one end and a threaded clean out on the other, one for each color, then I just put the bits in the pot and gave them a shake every now and then for 20 mins or so.

Trevor

Re: question about color...

#21

Thanks Trevor

Barbara Gill, Remlik VA

>