short bowl gouge.
john lucas
>I've been working on my Smith lathe/mill trying to tune it up. It's a lot better than it was but I still have some slop I have to work on. I thought I would try to mill a deeper cut to see how it works. I got some chatter but not bad.
I thought I would try to make a bowl gouge tip. This would let me play with different shape grinds or put Hunter tips or other carbide tips on a short piece of steel to see how they work. I'm going to make a bar to hold these and then fit the bar into my Big Stick handles.
This is 5/8" x 4". I milled a small flat on top so I could use my Wolverine jig. I haven't hardened it yet. I'll fine tune the grind after I do that.



