Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Hut friction polish

Posts

Hut friction polish

#1

Hut friction polish

bq in vt

>Anyone ever used the Hut friction polish? Was interested in trying it on some smaller pieces and looking for info. Thanks, as always, in advance.

Re: Hut friction polish

#2

Re: Hut friction polish

Sean Troy

>I've used it with good results but happen to like Mylands a little better.

Re: Hut friction polish

#3

Re: Hut friction polish

keith zimmerman, Normal IL

>I got received some when I bought a complete penturning setup, but found the finish was too soft and wasn't durable for pens. I do, however, use it on finger tops and as the first step on bottlestoppers. I like to follow up with a final buffing of my bottlestoppers with carnuba wax using my Beall wheel.

keithz

Re: Hut friction polish

#4

Re: Hut friction polish

mpax356

>I got a bottle that was used when I bought my Jet mini lathe used about 15 months ago and am still using it. I have heard that it has a shelf life of only a year but I am a year past the expiration date and it still works fine. I use it on all of my small turnings like ornaments and lidded boxes. I use it over UBeaut EEE which really works great. I have heard several folks that have used it but prefer the Mylands friction polish which is what I will get when I finally run out.

Re: Hut friction polish

#5

Re: Hut friction polish

Walta

>I have used Hut Crystal Coat and it works if you want a fast shine that will not take a lot of abuse. If you check the label you will find this is a shellac based product. Liquid shellac has a short shelf life. There is a best used by date on the back label. Shellac is a great finish but you must understand that it has 2 weaknesses alcohol and water and shellac offers little protection from them.

Walta

Re: Hut friction polish

#6

Re: Hut friction polish

mfoster

>I use Hut polish now and again. Like others have stated, this is really a wax based finish and I use it as such. If you read their blurb on it, it is really a mix of carnuba wax (and maybe some bees wax, but I'm not sure) and diatomacious earth. The latter acts as a fine abrasive. I believe that the finish is really meant as a top coat over some other finish. I would venture to guess that a majority of turned objects are finished by:

1) sanding to however fine a grit that you can stand or have patience for

2) apply a finish of whatever ilk (shellac, lacquer, varnish or one of the multiple oils)

3) Buff and wax

Hut combines the buffing compound and wax and I usually use it (as I believe it was intended) with the wood spinning and a soft cloth, although it can also be used on a rag wheel with the object in your hands.