Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Very Spaulted maple

Posts

Very Spaulted maple

#1

Very Spaulted maple

Bob Edwards

>Matt Kramer brought me this piece of spaulted maple that was almost to far gone. The finish is two part epoxy thinned with acetone. It was the only way to firm up the wood.


img

Re: Very Spaulted maple

#2

Thinned epoxy?? Alright!

Allen Neighbors

>Beautiful Bowl, well done.

I have some of this stuff also. It's hard to get a smooth cut, but when I get some made, they're beautiful! Maybe I need to try the thinned epoxy to firm it up, also.

Do you thin it so that it soaks into the wood, or do you just put a thin coating on the outside?

Re: Very Spaulted maple

#3

Re: Thinned epoxy?? Alright!

Bob Edwards

>No Allen I thin it to the point I think it will soak in. I also find it helps to thin the epoxy first than add the hardener. If I mix the epoxy than add the acetone it seems to weaken the epoxy.