Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Vega Model 24 bowl lathe

Posts

Vega Model 24 bowl lathe

#1

Vega Model 24 bowl lathe

Toney Robertson

>I have the potential to get a Model 24 lathe.

I can find no reference in regards to price on the internet. What would you think a good price on that lathe would be?

Would there be any advantage to this lathe over my Nova 3000 since the 3000 head rotates and I have the outboard turning attachments?

Any help would be appreciated.

Toney

Re: Vega Model 24 bowl lathe

#2

Re: Vega Model 24 bowl lathe

Grant Wilkinson

>Is this the bench top model? If so, it sells new for $1395 on the Vega site.

Re: Vega Model 24 bowl lathe

#3

Re: Vega Model 24 bowl lathe

Allen Neighbors

>Toney, one can never have too many lathes. :o)

I'd say the motor is bigger than your Nova. If not, it's still another lathe. :o)

Re: Vega Model 24 bowl lathe

#4

Brad Vietje

Re: Vega Model 24 bowl lathe

Brad Vietje

>Toney, Grant,

If it is truly a model 24, and not the 2400, it is a bench-top lathe with a 24" swing, a 1" - 8tpi spindle, a short bed, and no tailstock.

I have been away from turning these past 2 years, but I understood that model was discontinued. If that's the one, it was available new for between $595 and $695 about 5 years ago, before it went out of production. I looked quite seriously at buying one back then. Probably would have it they offered a tailstock option and small bed extension to accommodate it.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Vega Model 24 bowl lathe

#5

Brad Vietje

Re: Vega Model 24 bowl lathe

Brad Vietje

>Ah-Ha!

It's been re-introduced as the 2413-B with a tailstock and a beefier 1-1/4-8 spindle. At 160 pounds its lighter than the big boys, so you'd want to bolt it down to a really beefy bench.

Might also make a more portable bowl lathe for craft shows, demo's etc...

Safe spinning,

Brad Vietje

Newbury, VT

Re: Vega Model 24 bowl lathe

#6

The guy is asking

Toney Robertson

>$300.00 for it and I would assume that he would take less since most people ask for more than they are willing to take.

What say you?

Toney

Re: Vega Model 24 bowl lathe

#7

Brad Vietje

Go For It !

Brad Vietje

>

Re: Vega Model 24 bowl lathe

#8

I would jump on that in a heartbeat.

john lucas

>

Re: Vega Model 24 bowl lathe

#9

Re: I would jump on that in a heartbeat.

Don at Central Illinois

>If you don't want it, tell the rest of us where it is. I'd be interested if close enough to drive to pick it up. Go for it.

Re: Vega Model 24 bowl lathe

#10

Steven Antonucci

Sold!

steve antonucci

>Get it before someone else does.

May not be better than your Nova, but at that price, I wouldn't pass it up...

Steve

Re: Vega Model 24 bowl lathe

#11

Re: I would jump on that in a heartbeat.

Jerry from near Lapel In.

>http://indianapolis.craigslist.org/tls/914965910.html

Re: Vega Model 24 bowl lathe

#12

Re: The guy is asking

JohnKyler

>There is an upgrade for the earlier ones that make it so you can use standard chucks.

I would check with Vega and see if they still have any left?

One of those sold here in CO last year for $200