Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Warning: Graphic depiction of a Shop Accident! :-)

Posts

Warning: Graphic depiction of a Shop Accident! :-)

#1

Steven Antonucci

Warning: Graphic depiction of a Shop Accident! :-)

steve antonucci

>Ok, now that morbid curiousity has gotten the better of you, I was not injured at all. In the grand scheme of things, I wasn't even in the shop when it happened, and even if I had been, there wouldn't have been anything that I could have done to prevent it.

I have been using a product that chemically patinates copper to form oxides on a couple of vessels I turned. Apparently, I was about to experience the Butterfly Effect, but didn't know it until much later that night.

The patina contains a dye that is supposed to help add some additional color to the reaction. I don't love the color (too blue, too bright...), but I decided that this vessel was ok for experimenting, so what the heck...

In the past, I had brushed it on, but I was never fond of the look because it created streaks in the finish. I had a small sprayer bottle that I used last night. It was for cleaning eyeglasses and worked great, except the pump kept clogging, which must have distracted me from the fact that I didn't reseal the "almost full" bottle of the patina.

I had my vessels suspended from rope so that I could get full access all the way around and it would be easy to create the bursts of color I wanted. I sprayed away and kept unclogging the tip until I was done and happy with the results. I went back inside to watch the end of a TV show I had paused and as I closed the door, I heard the clanging of a bowl that I keep on the shelp above my main workbench fall. Didn't think much of it, and just figured I'd pick it up in an hour or so when the show was over. Besides, the patina takes a while to react with the base metal paint anyway...

Show ends, and I open the door to find this giant blue amoeba on the floor. Now, I am not overwhelmingly horrified, since I let my kids draw on the floor with chalk anyway...until I swing around to view my workbench!

I have been procrastinating on making the last drawer and the other three QSWO faces for quite some time, so it could have been worse. I am pretty sure that the color isn't coming out, and that I will not lose too much sleep over it. I'd bet that it was a sight to see, since there are also little blue spots on my folding chair, the lower half of my tablesaw and probably a few other places I haven't figured out yet. Some days, you just can't win...

Steve


img

Re: Warning: Graphic depiction of a Shop Accident! :-)

#2

Steven Antonucci

Better view of the bench 

steve antonucci

>


img

Re: Warning: Graphic depiction of a Shop Accident! :-)

#3

Re: Better view of the bench

John K Jordan

>I've seen "artists" get big money for something similar but not as interesting.

JKJ

Re: Warning: Graphic depiction of a Shop Accident! :-)

#4

Looks as good as

Gil Jones---Georgia

>some of the artwork in the Atlanta airport.

Gil

Re: Warning: Graphic depiction of a Shop Accident! :-)

#5

Re: Warning: Graphic depiction of a Shop Accident!

Jerry Whitaker

>Nice to know that someone else has a floor as ugly as mine.

Re: Warning: Graphic depiction of a Shop Accident! :-)

#6

Re: Warning: Graphic depiction of a Shop Accident!

Sam Scalzo

>Steve,I had a can of flocking cement fall off my router table. It was red and what a mess. Of course it was a full can. I cleaned it up with some asetone as best as I could. So,then I painted my floor. The good thing now is I can clean the floor better.

Re: Warning: Graphic depiction of a Shop Accident! :-)

#7

Another of Murphy's Laws

Gary Evans Tallassee, TN

>Any container left sitting without a lid, WILL get knocked over.

Gary

Re: Warning: Graphic depiction of a Shop Accident! :-)

#8

Re: Warning: Graphic depiction of a Shop Accident!

Don Orr

>Looks like you were hit by Jackson Pollock ;-))

I don't like that blue much either.

I do want to see your experiments though.