Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Swing Away Tail Stock

Posts

Swing Away Tail Stock

#1

Swing Away Tail Stock

Sean Troy

>Hey all, does anyone know of anyone who makes a tail stock swing away adapter for a PM 4224 ? thanks for any info, Sean

Re: Swing Away Tail Stock

#2

Re: Swing Away Tail Stock

DavidWalser

>Sean,

I'm not familiar with a maker of a swing away tail stock adapter for the Powermatic. However, I met an old turner who claimed he never lifted off the tail stock off his lathe. Instead, he rigged up a block and tackle to hoist the tail stock up to the rafters when he wanted the tail stock out of the way. Me, I'd be nervous standing under such a heavy piece of cast iron. He said it didn't bother him. YMMV.

Re: Swing Away Tail Stock

#3

Re: Swing Away Tail Stock

john lucas

>I built such a rig for a friend. We used a barn door track to run on the ceiling and then used a block and tackle deer hoist to go from the tail stock to the barn door slider. Then she simply attached the hoist,lifted the tailstock and slid it across the room to the workbench.

I haven't seen a 2442 rotating tailstock holder but check with Micheal Hare at VMWoodworking. He makes the 3520 tailstock rotating thingy.

Re: Swing Away Tail Stock

#4

Re: Swing Away Tail Stock

Sean Troy

>Thanks John, I haven't been able to locate any contact info for VM but will keep searching, Sean

Re: Swing Away Tail Stock

#5

Lots of solutions here *LINK*

Jerry Hall

>Sean, you probably have looked at this Mustard Monster link, but just in case, bottom of the page are a bunch of ideas that may lead to a solution. My "prototype" with a big gate hinge isn't pretty but it is still going strong after 18 months, and swings well away and down for hollowing off the end. The last time I took off my tailstock was for a demo at my shop so it wouldn't block the view. Construction details at:

http://picasaweb.google.com/jerhall95945/SwingAwayAndDownTailstockForPM3520#

Jerry


Mustard Monster Site

Re: Swing Away Tail Stock

#6

Re: Lots of solutions here

Sean Troy

>thanks for the info

Re: Swing Away Tail Stock

#7

Re: Swing Away Tail Stock

john lucas

>Sean I just did a search and came up empty also. I think I have his card at home, I'll look. I know he's still around because he's a vendor at the Tennessee Symposium in January. He sells an excellent Keyless chuck and an index wheel that I purchased from him.

Re: Swing Away Tail Stock

#8

Re: Swing Away Tail Stock

Sean Troy

>when you get a chance, no rush. thanks

Re: Swing Away Tail Stock

#9

Re: Swing Away Tail Stock

Dennis Yoder

>Sean, try vmwoodworking1982@yahoo.com Dennis Y

Re: Swing Away Tail Stock

#10

Re: Swing Away Tail Stock

don lewonczyk

>I bought one for my 3520B from a guy in GA for $200 plus $20 shipping, I'll have to look up his phone number, I believe he either had one for your lathe or was working on it at the time I ordered mine. His first name is Don, someone on WC posted a responce to me before with all the info. His card is down in my shop and I'll get it later if I can remember. DonL

Re: Swing Away Tail Stock

#11

Re: Swing Away Tail Stock

Charles Watson

>His name is Don Butler, Cleveland, GA

Re: Swing Away Tail Stock

#12

Re: Swing Away Tail Stock

don lewonczyk

>Right on, Don Butler phone 706-219-1603. He is in the final development of the proto type and should be availabe soon. The closest PM machine is 70 miles one way and he needs to mark the holes to drill the swing away and then test it next week or the week after at John C. Cambell school. Nice guy, give him a call,I just got off the phone with him and I have nothing to gain by passing on this information other than being a happy customer. Hope this helps, now how about coming over and helping me feed and check 180+ cows and calves, bag up 300lbs grain and load it out? Any takers? Dude ranches charge for stuff like that to city slickers and I'd let you do it for free!!!!! DonL

Re: Swing Away Tail Stock

#13

Re: Swing Away Tail Stock

Don at Central Illinois

>Having been raised on a farm and had the privelege of farming for three years after Dad passed away, I'd be glad to help. If only you were closer to central Illinois.