Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

BIG gouge

Posts

BIG gouge

#1

Keith Tompkins

BIG gouge

keith tompkins

>I picked this up at an antique market in Vermont while on a swing through New England up to Maine. Buck Brothers, 2" wide, shown with a 5/8" diameter bowl gouge for comparison. I turned an ash handle for it, sharpened it up and ready to go. It was labeled as a carving chisel, but the vendor wouldn't lower the price, even though I told him it was "only" a turning tool. I don't know the age, but the logo on the tool came into use around 1895 and has been used since. High-carbon steel.


img

Re: BIG gouge

#2

Shear Scraper *LINK*

gil jones---Georgia

>Nice old gouge. Don't know what you will do with it, but the old one I found at a flea market made a wonderful shear scraper. Check out this article by Joaz Hill; I followed his idea, and it worked like he said it would. If I can find the picture of mine, I will post it, and I sure do like how it cuts.

Gil


http://www.maine-web.com/woodturning/shapeshifter/scaper.html

Re: BIG gouge

#3

Found The Shear Scraper Photo 

Gil JOnes---Georgia

>


img

Re: BIG gouge

#4

Keith Tompkins

Re: Shear Scraper

keith tompkins

>Hi Gil, I think this tool will come in handy....these big gouges will remove lots of wood in a hurry, excellent for shaping hollow forms or big spindle work. Also, great teaching tool, students can see and feel how the tool should work. I expect this gouge to be part of my everyday selection. I'll have to try the shearing grind, thanks.

Re: BIG gouge

#5

VT

mfoster

>Hi Keith

What part of Vermont were you in, and where did you pick up that gouge. I am in the south eastern part of VT and have cruised many of the antique stores around here. I wouldn't have passed that by if I saw it. Good score. I would guess you were just cruising through VT, but you're welcome to stop in here any time. Hopefully will see you at the next Totally Turning.

Re: BIG gouge

#6

Keith Tompkins

Re: VT

keith tompkins

>Hi Mike, We drove up to White River Junction, then cut across to New Hampshire, then to the Maine coast near Rockland, then took the same route back. I found the gouge in Quechee Gorge. There's an antique center there, and outdoor fair was going on as well. I'd like to stop in sometime, there's a couple of other turners I'd like to visit as well.

Re: BIG gouge

#7

Re: VT

mfoster

>Keith, I live about 45 minutes south of White River Junction in Springfield, just off of I 91. I know the antique shops you went in. I have driven by them, but never stopped in (my wife has). My loss.

Just as a guess, I bet you were teaching at the Rockport Center for Furniture Craftsmanship. My wife and I spent a week on a tall ship that sailed out of Rockport. While we were there, I found the center and went in to check it out. There weren't any classes going when I was there, but it was a wonderful facility. I was able to talk with one of the interns, and he was kind enough to show me around the school. The gallery had several nice turned pieces by some of the teachers displayed. It is certainly a place where I would consider taking a course.

Re: BIG gouge

#8

Keith Tompkins

Re: VT

keith tompkins

>Hey Mike, next time I'll give you a call and see if I can drop by. Actually, I was demo'ing for the Maine Woodturners, who meet near the school. A representative of the school attended my demo, and asked if I would teach a class at the center as well, so looks like I'll be going back. I absolutely love New England, esp. the rocky coastline.

Re: BIG gouge

#9

Brad Vietje

Re: VT

Brad Vietje

>Keith, Mike,

Please keep me in the loop, too. I live about 45 minutes north of WRJ, and we could certainly meet at a most excellent brew pub in Lebanon, NH -- The Seven Barrel Brewery. Please let me know when you are up this way again.

Safe spinning,

Brad Vietje

Newbury, VT

New e-mail: greensun@fairpoint.net

Re: BIG gouge

#10

Keith Tompkins

Re: VT

keith tompkins

>Hey Brad, It was you and David Belser I had in mind in the previous post. Sounds like a mini-symposium is in order!!! How's the solar business going? Good to hear from you!

Re: BIG gouge

#11

Brad Vietje

Re: VT

Brad Vietje

>Hi Keith,

How's about an actual symposium? In May comes the next New England Wood Turning Symposium, at Pinkerton Academy in Londonderry, NH, which is right near Manchester. Not so close to me and Mike, but closer to David Belser. Odds are, we'll all be there -- maybe you, too.

Clear skies and Safe spinning,

Brad Vietje

Re: BIG gouge

#12

Keith Tompkins

Re: VT

keith tompkins

>Hey Brad, that may be in the works!! Later, Keith