Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Epoxy resin and lacquer

Posts

Epoxy resin and lacquer

#1

Epoxy resin and lacquer

Barry Elder

>I am experimenting with epoxy resin on some wood many of you wouldn't bother to try to turn but I have never used lacquer. My question is can lacquer be successfully applied over the epoxy resin? The resin will be sanded to 220 or better.

Re: Epoxy resin and lacquer

#2

Re: Epoxy resin and lacquer

Brian Hahn in SW Wisconsin

>Spray can lacquer worked for me.

Brush-On Deft didn't work - the brush-on formula contains a drying oil and something in the epoxy prevented the oil from hardening.:(((

Apply a thin seal coat of fresh shellac (1 lb cut) and virtually any top coat will work.

Re: Epoxy resin and lacquer

#4

Re: Epoxy resin and lacquer

john lucas

>Barry I spray lacquer over epoxy patches and have not had a problem. I use a commercial brand called Benco.

Re: Epoxy resin and lacquer

#5

Jesper, Denmark

Re:No problem, but.....

Jesper, Denmark

>The epoxy will leave what is called an amine blush after curing. This needs to be removed with a wet rag and just hot water before you can paint anything else over the resin, otherwise it will not adhere.

The amine is very water soluble, so is easily removed with water.

You also need to realize that the epoxy is sensitive to UV light, so the varnish or laquer over it should have some UV inhibitors in it. Shellac would not have these properties, so if the object is in sunlight, the epoxy will eventually break down.

Re: Epoxy resin and lacquer

#6

Re: Epoxy resin and lacquer

Barry Elder

>Thanks for the info, guys, you're the best!!!

Re: Epoxy resin and lacquer

#7

Yes. Fresh de-waxed shellac.

Brian Hahn in SW Wisconsin

>