Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

coffee grind finishing?

Posts

coffee grind finishing?

#1

coffee grind finishing?

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>I have a coffee machine that periodically needs emptying of the coffee grinds, which come out in nice neat compressed disks. So I have a more or less endless supply. I've heard that coffee grinds are sometimes used in finishing. What's the deal with that? What kind of wood? How is it applied?

Re: coffee grind finishing?

#2

Re: coffee grind finishing?

Steve in NC

>Eloit

It is fairly common to use coffee grounds as filler. I use them to fill defects particularly when I need a dark color. It often looks like a bark inclusion.

I have tried mixing the grounds with clear inlace and pouring the mixture in but I have found that it works better to put the grounds in the void and them apply thick CA glue to hold it all in place. FOr larger voids it may take more than one layer.

When dry sand it smooth. I sometimes mix in other materials such as light sawdust, brass filings, or ground sea shells for contract.

Enjoy

Steve

Re: coffee grind finishing?

#3

Re: coffee grind finishing?

Steven Kubien

>I have had good luck mixing grounds with epoxy and then pressing the mixture into cracks, knots etc. A light pass with a sharp tool levels things out and reveals if there are air-pockets which need further attention. If so, do it again and continue until you are happy. Sanding is easy.

HTH

Steve Kubien

P.S. I use a lot of salad bowl finish (General Finishes) and have never had a problem. I suspect that lacquer would be the same.