Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

burl help

Posts

burl help

#1

burl help

John Willoughby

>Hi

I am new here and just found about this place from a member here yesterday.

I have a question that I need some help on.

I just got a few pieces of really figured burl in the mail to make some turning out of.

My question is, should I stabilize the burl before trying to work with it.

If I should stabilize the burl, should I use CA glue or?

This is the first burl I have ever worked with, so any help would be great, as I don't want to mess this up.

Thanks

here is a combo picture with both oak and cherry

[img width=600 height=450]http://i112.photobucket.com/albums/n164/jkwillou/duckcallsburl001.jpg[/img]

Oak

[img width=600 height=450]http://i112.photobucket.com/albums/n164/jkwillou/duckcallsburl002.jpg[/img]

Cherry

[img width=600 height=450]http://i112.photobucket.com/albums/n164/jkwillou/duckcallsburl003.jpg[/img]

Re: burl help

#2

Re: burl help

John Willoughby

>lets try the picture thing again

[IMG]http://i112.photobucket.com/albums/n164/jkwillou/duckcallsburl002.jpg[/IMG]

Re: burl help

#3

Re: burl help

John Willoughby

>one last time

Photobucket

Photobucket

Re: burl help

#4

Re: burl help

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>The picture appears to show well-aged burl that's nice and stable. My experience with such wood is that the grain tends to be very tight so you really don't have to worry much about cracking or warping. And , because it's burl, the grain runs every which way . So the orientation is not much of a problem , either. Just look at the figure and cut some blocks in a pleasing orientation in the size you want and go for it! You will certainly get other opinions, and probably from people who know more. But I've rarely had problems with burl.

Re: burl help

#5

Re:John- burls are both a treat and......

Jamie Donaldson

>...a trial to turn, but they make choice turnings when you learn to handle the convoluted grain and hardness when dry. Without knowing your skill level, try a smaller project or two to learn the techniques need, or you could solve the whole problem by shipping them to me! (;-D)

Re: burl help

#6

Re: burl help

Gary Evans -- Tallassee TN

>Hi John,

Nice to see you on here. It was a pleasure meeting you the other day. We should have talked longer. I didn't realize that you are a woodturner.

There will be some pretty wood in those blocks.

Gary

Re: burl help

#7

Brad Vietje

Re: burl help

Brad Vietje

>I agree. I usually find burled wood less problematic than straight-grain wood. Sometimes burl wood opens up into very interesting little voids (search for Jarrah Burl photos), which I really like. You already have a few pockets and maybe some small bark inclusions, so these pieces look fairly stable, but I expect all wood to move as it dries and as it's cut.

Nice wood! Show us what you make.

Safe spinning,

Brad Vietje

Newbury, VT