Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Amboyna Burl HF

Posts

Amboyna Burl HF

#1

Amboyna Burl HF

Neal Addy

>Been a long time since I've posted a HF. Here's a new piece.

Amboyna burl HF. 3-5/8" x 1-7/8", finished with SAC and buffified. It is what it is.


img

Re: Amboyna Burl HF

#2

Re: Amboyna Burl HF

Ken

>WOW,that is one beautifull piece

Re: Amboyna Burl HF

#3

question

Steven Kubien

>Wonderful piece...but what is SAC?

Thanks,

Steve Kubien

Re: Amboyna Burl HF

#4

Re: question

Neal Addy

>Thanks folks.

Steve, SAC is "Seal-A-Cell". My favorite finish so far.

Re: Amboyna Burl HF

#5

Steven Antonucci

Lovely, but how did you decide on top/bottom?

steve antonucci

>What drove you to put the darker color on the top, when a great many folks might have put it underneath?

(BTW- it works great!)

Steve

Re: Amboyna Burl HF

#6

Re: Lovely, but how did you decide on top/bottom?

Neal Addy

>Thanks Steve. It just seemed logical. I wasn't sure how much heartwood/burl there would be on this piece judging by the cut blank. I wanted to maximize the beauty of the burl.

Re: Amboyna Burl HF

#7

Re: Amboyna Burl HF

Ray Carson - Lawrenceville, NJ

>That's beautiful. I know the wood had a lot to do with it but you done real good Neal. Great job.

Ray

Re: Amboyna Burl HF

#8

Re: Amboyna Burl HF

Barry Elder

>Neal, you did your normal master-work with this piece. It is really spectacular!

Re: Amboyna Burl HF

#9

Re: question

Texian

>Neal,

Have seen numerous references to SAC and ArmRSeal (sp?) and have questions too. It appears that you get a completely filled and level, glassy finish. Am curious how applied, and what degree of sanding and/or buffing is needed to get a level surface. By level I mean (like "color sanding" a vehicle paint job) with no bumps, depressions, or orange peel. Used to do this years ago, spraying many coats of polyurethane varnish, but takes too long and too much work for the average piece.

Re: Amboyna Burl HF

#10

Re: question

Neal Addy

>Hi Texian,

This was sanded to 800 and only given a single coat of Seal-A-Cell. I allowed 3 days to cure before buffing with all three compounds. It was still slightly tacky to the touch when I buffed it.

Re: Amboyna Burl HF

#11

Re: question

Texian

>Thanks Neal.