Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Va Symposium

Posts

Va Symposium

#1

Dick Hines

Va Symposium

Dick Hines

>For all that did not attend you missed a good time. There were demos and hands-on rotations for two days. It ran the gamit from hollow froms to multi axis turning, ornaments to fishing luers. Except for 4 true demos all the rest, after a short how to you could get chips on your shirt with a mentor standing by in case you needed help. At any one time there were 12 lathes running at one time.

A good time was had by all.

Re: Va Symposium

#2

Re: Va Symposium

Scott Hurley in N. VA

>I agree. I especially liked the chance to try something I hadn't done before. There was something for everyone, from beginners to experienced turners. I thoroughly enjoyed it.

Scott

Re: Va Symposium

#3

I agree! It was a new format and ...

Ed Moore in SW Virginia

>I applaud the courage of the Symposium Board who tried something new. I admit that I was skeptical at first, but the obvious interest of the attendees as they went to the different sessions convinced me that it worked.

There were a lot of good friends there. I was able to chat with Dick Hines, Ed Karch, Tom Boley, Chuck Mosser, Tom Crabb and a host of others who I don't normally get to see. Ask Tom about his Crabb Shack.

I made an urchin mushroom birdhouse ornament with two entrances and perches opposite each other. Over one entrance I put "Sushi Bar" and over the other I put "Bait". At the end of my demo I gave this ornament to someone selected randomly. He seemed to appreciate the humor of it.

I hope that more people attend next time and take advantage of a great opportunity - it was a lot of fun.

Ed

Re: Va Symposium

#4

Re: I agree! It was a new format and ...

Dale Bright

>I agree that the this format was very interesting. Two days with lot's of new things to try and/or watch every few hours.

Ed, I really enjoyed your demo.

Dale Bright

Re: Va Symposium

#5

Thank you!

Ed Moore in SW Virginia

>Dale, that was very kind of you to say that. When I got home this evening there sat a lone box that somehow didn't make the trip, as I had mentioned.

I am glad that you enjoyed the Symposium. There were a LOT of very interesting sessions. And it was a fun bunch.

Ed

Re: Va Symposium

#6

Rob Wallace

Re: Va Symposium

Rob Wallace

>Dick:

Is there any way of finding-out what the actual meeting/demo schedule was for this symposium if it was that different for more traditional schedules? I'd like to know exactly what went on and why it was thought that the VA Symposium was successful from the participant's point of view. It's hard to learn exactly what activities and demos took place (and how the hands-on activities were presented) from the scant information presented or commented on in this thread.

Is there a web site or other write-up about this symposium that someone could read? We are considering putting on a mini-symposium in the future, and would like to know what exactly was so successful about the Virginia woodturning event. Knowing this information in advance of our planning will keep us from trying to re-invent a wheel that someone else has already successfully done.

Thanks!

Rob Wallace

Re: Va Symposium

#7

Symposium format explanation

Ed Moore in SW Virginia

>Rob and others,

There were four 1 1/2 hour demos like we are used to seeing. These were done at 8:30 AM and 1:30 PM on Saturday and Sunday. Briefly, the topics in order were : 1) Offset turning; 2) Ornaments made from Sea Urchin shells; 3) Bending wood for Handles on Turnings; 4) Elliptical turnings. These were done by Demonstrators Barbara Dill, Ed Moore, Dick Vogel, and Walt Bennett and were very well attended.

There were four "sawdust sessions" with 12 lathe stations set up around the perimeter. The first three sessions were 2 1/2 hours in length and the fourth one probably lasted 1 1/2 hours before things "broke down" and everyone packed up. Each lathe had a Mentor with a topic. Mentors were encouraged to show what they wanted to show and then give members of their audience a chance to try/test what they were doing. I saw folks trying hollowing rigs, for example. I did a session on ornaments and earrings in the fourth rotation. They wanted to see "acorn birdhouse" earrings, so I made a pair for the one lady there and then did an acorn birdhouse ornament before the exodus began. Lucy Cruise did a session or two on marbling, and John Noffsinger and a young lady had a station all day Saturday on pyrography. There were sessions on turkey calls, pens, hollowing, ornaments, sharpening, bowls, goblets, offset turning, lamps, square turnings, vacuum chucks, and many others. Each station seemed to have a group of folks who were intently interested in that particular topic. I heard many very positive comments from the participants about the sessions that they had attended. By having a lot of diverse topics this format really gave a much broader spectrum than we usually get at a Symposium. And in many cases there were good opportunities to try things.

And we shouldn't forget the vendors. Klingspor, The Sanding Glove (Bruce Hoover), and Best Wood Tools were there. There were also two wood vendors with lots of burls. Yes, I got some nice Australian burl blanks for boxes. [grin]

It is my opinion that folks who "got into it" and attended sessions of interest to them went home with a much richer experience than usual. I would give this Symposium high marks for innovation, implementation, and content.

Ed

Re: Va Symposium

#8

Rob Wallace

Re: Symposium format explanation

Rob Wallace

>Ed -

Thanks for posting this description - sounds interesting, and I've printed your response and have added it to the planning folder for our future mini-symposium. I appreciate you taking the time to write this up - I'm sure others were interested as well.

I just got back from voting - I arrived 16 minutes after the polls opened here in central Iowa, and then spent 55 minutes standing in line and creeping along until I was able to officially check-in and vote. It took only 50 seconds to complete the ballot and submit the form. Fortunately, I was able to get through reading nearly all of the most recent issue of American Woodturner while I was standing in line. I hate wasting time, and this was a good use of time that would otherwise have been spent looking at the back of the head of the guy in front of me!

Have a great day!

Rob Wallace