Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Steussy Creations BowlSaw

Posts

Steussy Creations BowlSaw

#1

Steussy Creations BowlSaw

Richard R. Steussy

>When you introduce a new turning tool, you find all the skeptics! I demonstrated my BowlSaw to my club in Santa Rosa and they all sat on their hands. They thought it was too dangerous! I've turned over 40 sets of bowls with this tool and never felt threatened once. And my reply from 5 outside evaluations were all positive. The only difficult part of using the BowlSaw is getting the groove around the outside of the bowl blank and that depends on the skill of the turner. Using the BowlSaw has almost no risk as it merely drags itself in the groove to cut off the bottom of the "daughter-bowl" created by this groove. My position is that you get two bowls instead of one from a bowl blank and they match perfectly. I think that is a very attractive result. Thank you. Richard R. Steussy (Steussy Creations)

Re: Steussy Creations BowlSaw

#2

Re: Steussy Creations BowlSaw

Barry Turner

>At this year's TACA (Tennessee Arts & Crafts Association) Show in Nashville, TN, ther was a booth that had dozens of fascinating sets of nested bowls. They were all obviously turned(?) from the same piece of wood. Walls were about 1/2" thick. What's the big deal? Some of the nested bowls were oval in shape. I don't think we have figured out how to turn oval-shaped, nested bowls yet, have we? How'd they do that? Is there some kind of special machine that saws these bowls out somehow? Is that what you have?

Re: Steussy Creations BowlSaw

#3

Re: Steussy Creations BowlSaw

Richard R. Steussy

>No, I haven't figured out how to make oval bowls. All I wanted to do was save the wasted wood on expensive exotic bowl blanks. That seemed such a waste! If I could have bought a tool to do this I wouldn't have spent almost a year experimenting with my own unit. Now I see that Woodcut has a unit for mini-lathes which does what my tool does. The problem is it costs over $300. That's for the professional turner and I'm not he. If you are adventurous, e-mail me and I'll send you a complimentary copy of the BowlSaw for your evaluation. Dick