Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

finish for a burl

Posts

finish for a burl

#1

finish for a burl

Claudia Hayward

>I've just brought a burl bowl (cottonwood with natural edge) down from the shop and now I want to put some finish on it. I'm looking for a satin finish but without those nasty little dull spots where the finish seems to soak in forever. I've got lots of Watco oil, salad bowl finish, beeswax and lacquer sanding sealer. What would you experts suggest?

Thanks

Claudia

Re: finish for a burl

#2

Re: finish for a burl

Mike Jones, Redding, CA

>Claudia, I don't consider myself an expert, but I would recommend using your lacquer sanding sealer liberally. (as in several applications) Visit "Russ's Corner" on this site for a step-by-step on how to do it.

Re: finish for a burl

#3

Re: finish for a burl

Brian Hahn in SW Wisconsin

>I'd use either the Watco or the salad bowl finish. Wipe it on and wipe it off every day. You can speed up the process by wet sanding when you apply the second and/or third coat with fine sandpaper. I've found that sanding using the finish as a lubricant is very effective for smoothing out and sealing the really thirsty end-grain areas. The sanding dust and finish slurry acts as a wood filler. Wipe the slurry off and it should only take one or two more coats to get a uniform finish.

Re: finish for a burl

#4

Re: finish for a burl

Claudia Hayward

>Thanks for the help!

Claudia