Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

ceramic cutting tools

Posts

ceramic cutting tools

#1

ceramic cutting tools

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>What ever happened to the buzz about ceramic tools? I don't even know what a ceramic tool is, but I seem to recall that it was supposed to be super sharp and hold an edge very long. I just don't see anything about them any more.

Re: ceramic cutting tools

#2

Re: ceramic cutting tools

James McClure

>It sounds like it would work, but I haven't heard from anyone who has actually used them. Manny's has some ceramic cutters for turning tools:

http://www.mannyswoodworkersplace.com/

This is from their website:

>>>

Synthetic ceramic is the second hardest material known to man, only diamond being harder. Their hardness make the ceramic sharpening stones preferable to other stones as they can cut the hardest metals without wearing out. The drawback of early ceramics have been their brittle nature. The recent advances in heat treatment have resulted in tougher ceramic material to such an extent that bullet-proof vests are made from it. Our Ceramax-80tm tips are made at a small factory in the state of New York which specializes in making ceramic tools for cutting the toughest metals. These tips will give you clean cuts without the need for sharpening for long periods. These can be re sharpened by hand using fine diamond slip stones. At present we have three tips available for wood turners.

<<<

I would be interested to hear from someone who has used these.

Re: ceramic cutting tools

#3

Re: ceramic cutting tools

John K Jordan

>I've experimented briefly with ceramic on the lathe. An associate is in ceramic R&D and gave me some square rods to play with. They can only be sharpened with diamonds. I sharpened somewhat of an edge on one with diamond hones and made smooth cuts in a number of endgrain samples. I have some industrial diamond grinding wheels that I need to get mounted on a very slow-speed arbor before I can shape the pieces properly for better testing. These particular ceramics are experimental and contain carbon nanofibers making them super tough as well as extremely hard.

There are some very good ceramics out there. I think part of the problem in getting these into woodturning tools is convincing the companies there is a market. I did some work once with a ceramics company which makes parts for aerospace and automotive industries. The lead engineer showed me some ceramic arrowheads he was playing with and while they were very good, he didn't think the market was big enough to support production.

JKJ

Re: ceramic cutting tools

#4

Re: ceramic cutting tools

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>I ordered the T1. I'll try it for some hollowing. (It costs 24 + shipping) and report on how it does.