Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Paging John Lucas

Posts

Paging John Lucas

#1

Steven Antonucci

Paging John Lucas

steve antonucci

>John-

I seem to recall that you had posted a "necklace bangled" that was turned on 2 centers a little while back. I know how to do it, but I wondered if you could post a picture of the offcenter chuck that you used, assuming that it is homemade and not commercial.

I have a scrap of cherry burl that will be one of those things soon enough :-)

Steve

Re: Paging John Lucas

#2

Re: Paging John Lucas

john lucas

>I just used a 4 jaw Vicmarc 100 chuck with 3" jaws. I removed 2 jaws and glued the wood to a rectangular scrap. This was placed in the jaws and then tilted out slightly because I wanted a tapered pendant. After the first turning I simply moved the scrap block up in the chuck while trying to maintain the same tilted angle. I would then rotate the piece by hand and draw a circle with a pencil to see if I move it far enough or too far.

I probably have a photo but would have to resize it. If this isn't clear I'll try to do it but I'll be out of town for the evening so it might be tomorrow night.

Re: Paging John Lucas

#3

Steven Antonucci

perfectly clear, thanks!

steve antonucci

>

Re: Paging John Lucas

#4

You Tube Video #2? :-)

GalenV

>