Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

few questions on tools

Posts

few questions on tools

#1

few questions on tools

clay rose

>does anyone know if its possible to use woodcut proforme's line of hollowing tools with either the kelton or some other brand of hollowing gate since I cant seem to find the corrsponding gate proforme offers? also does anyone know where you can get a glaser tool handle? .... btw I really appreciate people's willingnesss and expertise in answering my recent "slew" of questions. I really enjoy leanring how to turn

Re: few questions on tools

#2

Dick Hines

Re: few questions on tools

Dick Hines

>Yep. They will fit in the handle that is 1/2" on one end and 5/8" on the other.

Re: few questions on tools

#3

Richard Allen

Re: few questions on tools

Richard Allen

>Glaser tool handle? You can get a Glaser tool handle attached to a Glaser tool. Glaser made an interchangeable handle. That handle only worked with Glaser tools which were made for that handle. I never saw one of those handles.

Re: few questions on tools

#4

Glaser tool handles

Dave Peebles Lyons, Ohio!

>Hi Clay,

About a year ago I emailed to folks who are now making the Glaser tools to inquire about buying some Glaser handles for my Thompson tools. They basically said "No Way" If you want the handle, you must buy the tool.

That led me to begin to make my own handles for Doug's tools. So far I am happy with the handles I have made.

Best wishes,

Dave

Re: few questions on tools

#5

Bill Blasic

Re: Glaser tool handles

Bill Blasic

>Clay,

I have a couple of Dave's handles and they are very well made and won't break your bank. I use them with my Thompson tools. If you happen to run across a Glaser handle you can get a tool from Doug Thompson to fit it and Thompson tools will not break your bank either.

Re: few questions on tools

#6

Re: Go with the Dave and Doug Combo

Steve in NC

>It is hard to beat Doug's tools and Dave's handles. They work great together. (And their customer service cannot be beat.)

Steve